Results 1 to 3 of 3

Thread: Seperating Stuck Filters

  1. #1
    Peter De Smidt's Avatar
    Join Date
    Jan 2001
    Fond du Lac, WI, USA

    Seperating Stuck Filters

    I bought some new filters. When I used them, they wouldn't come apart. (Usually I paraffin the threads, but I hadn't yet.) Why was I using two filters? Red + 6-stop neutral density. Since I don't have filter wrenches, the following method worked: I put pieces of strong double-sided tape on a counter. I pressed the ring of one of the filters onto the tape and turned the other filter. It worked great. It's not very field appropriate, though, and so I ordered some filter wrenches, which are really cheap, btw. Putting too much pressure on a couple of point on the circumference of the filter will likely bend the filter ring out of round. That would make it even harder to remove.
    "Poverty is the biggest cause of poverty." Rutger Bregman

  2. #2
    Jim Jones's Avatar
    Join Date
    Aug 2006
    Chillicothe Missouri USA

    Re: Seperating Stuck Filters

    The thin rubber pads sometimes used to help in removing bottle lids works much like double-sided tape. When one is above and one below the stuck filters, there are none of the pressure points that some filter wrenches apply to the filters. However, the wrenches are usually fine, and don't take up much space in a camera bag.

  3. #3
    Join Date
    Feb 2001
    Pine Junction, CO

    Re: Seperating Stuck Filters

    I carry a rubber jar opener in my pack. It weighs nothing and takes no space and can be used on the hood of a car or a flat rock when in the field. You are right about deforming the filter ring if it is gripped too hard. Try pinching just one edge and turning.
    Keith Pitman

Similar Threads

  1. Removing stuck filters or step up adapter
    By Kirk Gittings in forum LF DIY (Do It Yourself)
    Replies: 9
    Last Post: 5-May-2012, 10:23
  2. seperating pack film into sheets
    By jabberwock_11 in forum Darkroom: Film, Processing & Printing
    Replies: 16
    Last Post: 18-Nov-2011, 13:12
  3. Seperating lens elements for cleaning
    By AnselAdamsX in forum Lenses & Lens Accessories
    Replies: 2
    Last Post: 27-Jan-2007, 07:52

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts