Quote Originally Posted by Two23 View Post
I need to remove the glass from my v700 and clean the backside. What do I use--Windex? Alcohol? I think one of those two might damage a coating.


Kent in SD
I used Windex. It works well. But make sure to do it in a dust free environment and be sure to blow off any lint, dust, etc. and allow the Windex to evaporate before you reassemble it. I have to do this every year or so due to outgassing of the plastics. It's not too difficult to do, provided you can secure a dust free room.

To the OP, I wouldn't worry about the color of the glass, unless it's really noticeable. You can correct for that in post processing. I mean, color negative film has a pretty hard yellow cast to it, and people still can correct for it, so a tiny bit of green tint, won't mean much.