Page 12 of 16 FirstFirst ... 21011121314 ... LastLast
Results 111 to 120 of 155

Thread: Tools: Cheap and disposable vs. the best you can find/afford?

  1. #111

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    Quote Originally Posted by Jim Andrada View Post
    ... - I never have to fight the tool to make it do what I want. ...
    Jim this is probably the most concise, true statement about this subject and it alone is reason enough to go for the best quality item you can afford. You know a bad tool when you make an inward ‘huff’ or ‘sigh’ before stepping up to use it.
    --- Steve from Missouri ---

  2. #112

    Join Date
    Jan 2006
    Location
    Tucson AZ
    Posts
    1,822

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    Whenever this is not the case...that's when I get a better tool!

    I feel the same way, but when one is just starting out they might not have the experience to know whether it's them or the tool. And it's no fun fighting balky tools. I had a 12" Delta bandsaw for years - and I built a boat with it. But a few times the workpiece was heavy and awkward enough to stall the motor and push the saw over. I "graduated" to an industrial machine with 24"wheels and a weight of close to 1k pounds. Guess what? Never again had to worry about pushing it over, even when cutting 4"- 5" thick oak. Same story with the table saw.

    Sort of the same story with cameras IMHO.

  3. #113
    Drew Wiley
    Join Date
    Sep 2008
    Location
    SF Bay area, CA
    Posts
    18,337

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    I've got rid of all but my good tools. I can still screw up, and no tool is perfect. But I won't use anything like a router or jointer or power saw when I'm tired and stupid. Sanding is OK. Nor will I handle irreplaceable glass like my registration equipment uses if I'm too tired. I once dropped a Kern Dagor lens when I was tired with sweaty hands. The front coating got scratched. Luckily, these lenses had cult status by then, and I actually sold it damaged for more than I originally paid for it new.

  4. #114

    Join Date
    Mar 2014
    Location
    Virginia, USA
    Posts
    240

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    I do agree that the best tool that one can acquire will be better to work with than inferior ones but I think that using the right tool for the task is just as important if not more so. As a woodworker and machinist I sometimes use tools that are not tier one by any means but they are the right tool for the job and work far better than some of the high dollar tools that I do own that don't fit the need as well. As someone mentioned, I have less guilt about making non-reversible modifications to some less expensive tools than I would to my top grade ones. That includes photo equipment too.
    Brass is a metal alloy, not a lens type - MichaelE

    https://www.flickr.com/photos/jacketch/

  5. #115
    Jim Jones's Avatar
    Join Date
    Aug 2006
    Location
    Chillicothe Missouri USA
    Posts
    3,065

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    "A Vice-Grip is not the right tool for anything at all, but it is the best wrong tool for thousands of tasks."

  6. #116
    Jac@stafford.net's Avatar
    Join Date
    Dec 2012
    Location
    Winona, Minnesota
    Posts
    5,413

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    Quote Originally Posted by Jim Jones View Post
    "A Vice-Grip is not the right tool for anything at all, but it is the best wrong tool for thousands of tasks."
    Very good. However, I think the vise-grip has proven its place in welding.

  7. #117

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    Always go with the best you can afford, always. Otherwise, you end up upgrading and crying twice. Buy once, cry once.

  8. #118
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,385

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    Yes, and the many variations of Vise Grip specific to welding.

    Which are perhaps emulations of DIY Vise Grip modifications.

    Stick Arc Welding is as fun as LF, if you don't have to make a living at it.

    Quote Originally Posted by Jac@stafford.net View Post
    Very good. However, I think the vise-grip has proven its place in welding.
    Tin Can

  9. #119

    Join Date
    Nov 2017
    Posts
    654

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    I have at times bought the cheapest just because I knew before I would alter it to do the job I wanted to do. I do not care taking up an angle grinder to a cheap tool if I know I will be able to have it do the job I want to do.

    You never can have enough vise grips and hammers.
    Expert in non-working solutions.

  10. #120

    Join Date
    Mar 2005
    Location
    Newbury, Vermont
    Posts
    2,260

    Re: Tools: Cheap and disposable vs. the best you can find/afford?

    I have a set of ultra-cheap Chinese brad point bits that I picked up from a big lots store a few years back...which I have grown to consider irreplaceable - for the very fact that most of these bits are off measure by very small fractions...which is often exactly what I need for that "just a wee bit bigger" hole. Just sayin!

Similar Threads

  1. The Disposable Project
    By false_Aesthetic in forum Announcements
    Replies: 1
    Last Post: 6-Dec-2011, 12:28
  2. Need to find cheap headshots in LA HELLLP!!!
    By vldic0075 in forum On Photography
    Replies: 8
    Last Post: 16-Jun-2008, 11:06
  3. How are disposable cameras able to operate if they have no moving parts?
    By sennorita in forum Cameras & Camera Accessories
    Replies: 19
    Last Post: 11-May-2007, 18:28
  4. The Magic Ink & Disposable Culture
    By Ed K. in forum On Photography
    Replies: 64
    Last Post: 25-Jul-2006, 12:45

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •