Results 1 to 5 of 5

Thread: 4X5 Tri-X film pack questions

  1. #1
    Randy's Avatar
    Join Date
    Dec 2010
    Location
    Virginia, USA
    Posts
    1,486

    4X5 Tri-X film pack questions

    I have no idea how long I have had this film pack. It was in a film pack adapter that must have come with a 4X5 camera I had purchased years ago. It has 3 of the images already exposed. I don't know if the exposed sheets have been robbed from the pack or if they are still in the pack. I'll find out when I open it up to process a test sheet.

    Anyway, I recently acquired an empty 4X5 film pack adapter for my Graflex Series D and intend on finishing the unexposed film. Since I have no idea how far expired this film is, can anyone advise on what ISO would be a good place to start, and perhaps a good Rodinal dilution to use for processing (Rodinal is what I have...but may have some D-76 powder as well). I'll probably shoot a test sheet or two and process before going thru the remaining 10 or so sheets.

    I remember back in the 80's shooting 4X5 film packs when they weren't expired
    https://dl.dropboxusercontent.com/u/52893762/bigger4b.jpg

  2. #2
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,476

    Re: 4X5 Tri-X film pack questions

    LOL I will jump in. But many here use old film.

    I have heard and tried losing one stop a decade.

    I really believe in Rodinol especially at 1-100 distilled and 20 minutes at 68F and agitated.
    Tin Can

  3. #3

    Join Date
    Jun 2014
    Posts
    2,084

    Re: 4X5 Tri-X film pack questions

    I'd personally start digging for the D76 powder and expose a sheet at 200 or even 100 to see what comes out. Rodinal doesn't sound like the ideal candidate given this situation - but then again, the situation isn't exactly ideal to begin with, so what gives huh

  4. #4

    Join Date
    Mar 2002
    Location
    now in Tucson, AZ
    Posts
    3,631

    Re: 4X5 Tri-X film pack questions

    HC-110 is the choice of people who develop old 'found film', apparently for its low-fog qualities. Somewhere on www.westfordcomp.com. I don't think it matters much here. Film pack has been gone since 1992, and who knows how old yours is... so you're some ways off the map. Kodak products pre-1972 or so used the serif typeface on the logo, which may help place your pack to within a decade or so.

  5. #5

    Join Date
    Aug 2014
    Location
    London
    Posts
    73

    Re: 4X5 Tri-X film pack questions

    This is what got having just acquired two packs expired 1981. I developed in HC110 dil:B for 8m according the enclosed data sheet.
    Shot with flowers rated at 160 and used flash.
    Attached Thumbnails Attached Thumbnails Tri-X-pack-test.jpg   Tri-X-pack036.jpg  

Similar Threads

  1. Repurposing an PA-45 Instant Pack Film Holder to accept small pack film?
    By carynorton in forum LF DIY (Do It Yourself)
    Replies: 4
    Last Post: 25-Aug-2012, 18:06
  2. graphlex film pack adaptor -- three questions
    By folsombob in forum Cameras & Camera Accessories
    Replies: 10
    Last Post: 28-Nov-2009, 09:47

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •