Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: Does anyone have images of a De Vere 108 enlarger?

  1. #21

    Join Date
    Jan 2015
    Location
    Lake District, UK
    Posts
    45

    Re: Does anyone have images of a De Vere 108 enlarger?

    "Better get looking for some bellows". Found some!

    Well, it didn't take much looking, just a quiet cogitation with a brew. The bellows are right there!

    He's my plan: pick up the new lamp house, condenser et al and turn it upside down.

    I converted the 54 to LED and to be honest it's got too many lumen, but the same would be fine if going larger in terms of neg and print size, so:

    Click image for larger version. 

Name:	IMG_0337.jpg 
Views:	46 
Size:	54.6 KB 
ID:	181003

    I'll go with Randy's suggestion, make the base board; then I'll take out the condenser lens, attach what was the lamphouse stage (and will now be the lens stage) to the lens stage adjuster, and attach the condenser stage (which will now be the lamphouse) to the lamphouse adjuster and voila!

    I'll start a thread on the DIY section for this build.
    Last edited by TimberwolfII; 29-Jul-2018 at 05:13.

  2. #22

    Join Date
    Jan 2013
    Location
    Madisonville, LA
    Posts
    1,991

    Re: Does anyone have images of a De Vere 108 enlarger?

    From the UK auction site:
    Click image for larger version. 

Name:	s-l1600-10.jpg 
Views:	31 
Size:	61.0 KB 
ID:	181654Click image for larger version. 

Name:	s-l1600-9.jpg 
Views:	29 
Size:	65.2 KB 
ID:	181655Click image for larger version. 

Name:	s-l1600-8.jpg 
Views:	27 
Size:	67.5 KB 
ID:	181656Click image for larger version. 

Name:	s-l1600-12.jpg 
Views:	25 
Size:	94.0 KB 
ID:	181657

  3. #23

    Join Date
    Jan 2015
    Location
    Lake District, UK
    Posts
    45

    Re: Does anyone have images of a De Vere 108 enlarger?

    Whoa, thanks Luis!

    Looks not unlike what I've conjured up:

    Click image for larger version. 

Name:	IMG_0347.jpg 
Views:	33 
Size:	44.6 KB 
ID:	182565

    I've used the filter draw upside down with a devere 54 negative holder in an adapter plate:

    Click image for larger version. 

Name:	IMG_0348.jpg 
Views:	25 
Size:	45.2 KB 
ID:	182566

    Needs an inner door on my dark room to give it a test:

    Click image for larger version. 

Name:	IMG_0345.jpg 
Views:	35 
Size:	52.6 KB 
ID:	182567
    Back

    Click image for larger version. 

Name:	IMG_0344.jpg 
Views:	32 
Size:	84.2 KB 
ID:	182568
    Front!


  4. #24

    Join Date
    Jan 2015
    Location
    Lake District, UK
    Posts
    45

    Re: Does anyone have images of a De Vere 108 enlarger?

    Just looked at the date on that last post..... about a year ago!

    Done some faffing in the mean time. I got the cobbled up device working and did some prints, all I can say is I made some pieces of paper that had images on them which is fine. The images had poor contrast, I now find due to the particular LED source I used. (I got lucky with my de Vere 45 and an off the shelf LED that worked with variable contrast filters, the one I used for this 108 unfortunately didn’t, hey ho).

    Then I was getting a bad vignette because a part of the lamp house was shading the light from the source; easily fixed with a jig saw. Good job this 10x8 enlarger was 80 and not 800....

    I’m now redoing the upper lamp house (I’ve made two, one is a box with diffuser stuff off the LED downlighter which works fabulously - very even light at the paper - and an upper one that has the actual light source.) The new light source will be a gz 6.35 lamp specific to VC paper use. Looking about the web for a suitable bulb holder, connector and 240-12v transformer, seems like this lamp is used in projectors so that’s where I’m heading.

    I’ll post some more pics when it’s all nailed together for those who are interested but it looks a bit like those images posted by Luis ATM.

    Happy Sunday everyone !

    R

  5. #25

    Join Date
    Jan 2013
    Location
    Madisonville, LA
    Posts
    1,991

    Re: Does anyone have images of a De Vere 108 enlarger?

    What light source are you using? The ones I posted looks like a cold light head. L

  6. #26

    Join Date
    Jan 2015
    Location
    Lake District, UK
    Posts
    45

    Re: Does anyone have images of a De Vere 108 enlarger?

    The original equipment I received had a lamp house with two gigantic condenser lenses, so were lit by an incandescent bulb. My smaller De Vere 45 was cold cothode.

    Don't know if the lamphouse I have actually goes with the rest. I now have a lamphouse with a photography dedicated halogen lamp, a load of diffusion, the original condenser tube and more diffusion over the negative stage.

    The LED set up I had illuminated well, it was just the wrong wavelength so I got low contrast and no reaction to VC filtration. The new bulb is the correct wavelength so we shall see.....

Similar Threads

  1. De Vere Enlarger factory
    By pierre506 in forum Darkroom: Equipment
    Replies: 57
    Last Post: 30-Aug-2019, 01:39
  2. Replies: 0
    Last Post: 13-Jun-2013, 09:43
  3. Old De Vere enlarger
    By Dave Tolcher in forum Darkroom: Equipment
    Replies: 6
    Last Post: 22-Sep-2008, 14:32
  4. De Vere 507 enlarger
    By Awsiya in forum Darkroom: Equipment
    Replies: 4
    Last Post: 4-Mar-2002, 22:41

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •