Storing Lenses in plastic bags...

[paul owen]

As a point of interest, every new Schneider I have been fortunate to buy has always been "sealed" in a plastic bag. Is this true of other manufacturers? I should imagine that a lens would have to spend quite some time in such an environment for it to have an adverse effect on it? The best preventative measure is to use them often enough so that they don't stay in plastic bags for too long!

[Dan Fromm]

Henry, why use a plastic bag AND what sounds like a food storage container?

I ask because most of my lenses are kept and travel in food storage containers with appropriate padding. Brands? Rubbermaid and (please, no ribbing) Martha Stuart. The containers keep dust out very well and seem to protect the lenses from impact. So far I've dropped only one Rubbermaid container with a lens in it. It broke, the lens is fine.

My lenses that aren't are in closed cameras, in a "lens wrap," or stay home and hide in drawers. So far, no problems at all. Oh, yes, lens caps on all of them.

Cheers,

[Bob Salomon]

"have been fortunate to buy has always been "sealed" in a plastic bag. Is this true of other manufacturers?"

Yes. But not in bags that have plasticizers that can migrate onto the lens surfaces. And didn't those lenses have lens caps on them anyway?

[Capocheny]

Hi all,

Thanks for all the responses... very much appreciated.

Will,

Moisture won't be a problem since the lenses are used only indoors. Secondly, I'll be sure to include little satchels of silica inside the case. The container I'm looking at are made by a company called Sterilite. They have a lid on them and the body of the case is a see-through plastic material which facilitates seeing what's inside.

John,

Moi 2... that's why I thought I'd ask.

Bob,

Plasticisers? How would you know whether this is in the plastics? Is there some indications of its inclusion?

Dan,

Good question. Now that I think about it... I'm going to have a carpenter design a wooden storage unit with a dense foam on the bottom. The sides of the unit will have grooves cut into them so that the Technika mounted boards will slide into those grooves. That'll circumvent the need for the plastic bags (for separating the lenses from one another inside the plastic container (14x17x12).)

My wife has been on me to take all my gear off the fireplace mantle in the front living room. Hence, the need for the storage solution.

Thanks again

Cheers

[Bob Salomon]

" with a dense foam on the bottom"

Make sure it is not a formaldhyde based foam. Uretahne based foam gives the best support and protection and does not shread or liquify like formaldhyde based foams.

[Capocheny]

Hi Bob,

Thanks for the advice... urethane based it will be then.

Cheers

[John_4185]

Man, you anti-plastic bag folks are freaking me out. All my stuff is stored in plastic food bags. I'm half afraid to dig out the old gear now.

So I need new wraps? Guess I could find a use for Molly's old ripped-stitch mink coat... or would I be considered some kind of elitist? Okay, okay, fox it is. That's the ticket.
--
Save the Naugas

[Richard Ide]

Hi JJ

Plastic food bags are made from low or high density polyethylene which are among the safest materials, so I don't think you need to worry. Polyester is another safe plastic. Negative and slide storage sleeves are made from both plastics. I remember going into this subject a few years ago with an Agfa sales rep who was also a photographer. I had used vinyl storage for slides until I found out the plasticizers in it could be a source of potential problems.

Richard

[dan nguyen]

Hi all,

OK..OK..... this is my cloth wrapping around the lens theory.

It's from my own personal experiences. One warm day I went out with my photo-gear in the trunk of my car. At the destination, I took the the camera and the lens out and to my horror..... the plastic ziplock of the lenses was full of condensed humiditity and the lens are wet..... means droplets of water.... I put it back and drove home and... The week after that, I put a piece of cloth around the lenses and try again in similar situation... Guess what?... the cloth absorbed all the moisture.... moisture in the bag but not on the lens....

well.... it works for me to protect my lenses....