Results 1 to 8 of 8

Thread: Vintage Electronic Flash to Camera

  1. #1

    Join Date
    Sep 2003
    Location
    South Carolina
    Posts
    5,506

    Vintage Electronic Flash to Camera

    Hi,

    I have a 1970s era flash which I would like to connect to a modern digital camera, via a Wein safe synch hot shoe with a female PC connection. I would like to connect the old flash to the female PC connection on the hot shoe.

    Attached are several photos of the connector as it is. PC-1 is a shot of the connector as it comes from the flash, wired directly to the flash. The larger circle is about 0.5 mm wide, and is threaded on the outside. The inner circle is about 0.2 mm in diameter. PC-2 shows the connector from the flash, together with some type of adaptor. PC-3 shows the adaptor attached to the connector, and PC-4 is a shot of the PC connector on the camera.

    Does anyone recognizes the name of this type of connector? And if so, I would appreciate knowing what type of connector/adaptor I would need to attach the connector directly to the female PC connection of the Wein safe sych hot shoe.

    Sandy
    Attached Thumbnails Attached Thumbnails PC-1.jpg   PC-2.jpg   PC-3.jpg   PC-4.jpg  
    For discussion and information about carbon transfer please visit the carbon group at groups.io
    [url]https://groups.io/g/carbon

  2. #2

    Join Date
    Dec 2001
    Location
    NJ
    Posts
    8,483

    Re: Vintage Electronic Flash to Camera

    Sandy, this is very strange. The connector on the camera looks much like an old ASA connector. I didn't know that any recent cameras had ASA connectors.

    Cheers,

    Dan

  3. #3

    Join Date
    Aug 2013
    Location
    Chicago
    Posts
    1,856

    Re: Vintage Electronic Flash to Camera

    The cord looks like an old Honeywell cord with an ASA tip screwed on. At the time it was made, that cord had a variety of tips available, but I doubt you will find the PC tip now. I bet the other end of the cord is a standard household plug. Household to PC cords are available from Paramount.
    Thanks, but I'd rather just watch:
    Large format: http://flickr.com/michaeldarnton
    Mostly 35mm: http://flickr.com/mdarnton
    You want digital, color, etc?: http://www.flickr.com/photos/stradofear

  4. #4
    Photographer
    Join Date
    Feb 2001
    Location
    Pine Junction, CO
    Posts
    993

    Re: Vintage Electronic Flash to Camera

    You might try perusing the custom cordssection at paramountcords.com and see if you can configure an adapter. If not, try calling or emailing them.
    Keith Pitman

  5. #5

    Join Date
    Sep 2003
    Location
    South Carolina
    Posts
    5,506

    Re: Vintage Electronic Flash to Camera

    Dan,

    To be clear, the connection in the photo is on the old camera which came with the flash, not the modern digital camera to which I want to use with the flash. The camera appears to be from the 60s or 70s, perhaps some type of Pentax.

    Assuming that the connector is an ASA, would you know if I could buy an adaptor to connect from ASA to female PC?

    Sandy
    For discussion and information about carbon transfer please visit the carbon group at groups.io
    [url]https://groups.io/g/carbon

  6. #6
    Photographer
    Join Date
    Feb 2001
    Location
    Pine Junction, CO
    Posts
    993

    Re: Vintage Electronic Flash to Camera

    Also found this:

    https://www.ebay.com/itm/PC-Long-Tip...gAAOSwQPlV~LYK

    There are other similar ones on Ebay. I believe I have one of these in some vintage gear!
    Keith Pitman

  7. #7

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,410

    Re: Vintage Electronic Flash to Camera

    Not having a profile view of the threaded portion makes it hard to tell but Rollei had a threaded PC connector on some TLR cameras and the early SL 66 camera. They also accepted a standard PC cord. I am not aware of any flash units with a built in Rollei threaded PC cord.

  8. #8

    Join Date
    Sep 2003
    Location
    South Carolina
    Posts
    5,506

    Re: Vintage Electronic Flash to Camera

    Thanks for the feedback, I will be calling paramountcords.com about this.

    Sandy
    For discussion and information about carbon transfer please visit the carbon group at groups.io
    [url]https://groups.io/g/carbon

Similar Threads

  1. Converting Graflex 3 cell flash into electronic bare bulb flash
    By Jackle in forum LF DIY (Do It Yourself)
    Replies: 18
    Last Post: 24-Nov-2016, 19:27
  2. Vintage electronic flash for Speed Graphic
    By SpeedGraphicMan in forum Cameras & Camera Accessories
    Replies: 10
    Last Post: 30-Oct-2012, 16:14
  3. Flash Supermatic Electronic Flash Sync
    By Robert Budding in forum Lenses & Lens Accessories
    Replies: 3
    Last Post: 20-Sep-2009, 17:14
  4. Electronic Flash
    By Jim Chinn in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 25-Apr-2002, 12:43
  5. Electronic Flash - What to Get
    By neil poulsen in forum Style & Technique
    Replies: 8
    Last Post: 18-Jul-2001, 16:04

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •