SP-445 Just Arrived

[IanBarber]

Ian,
Here's a photo of the 450ml indicator.
Tim

Attachment 169165

Thanks Tim - I see it now

[esearing]

Ian,
Here's a photo of the 450ml indicator.

Assumes you are using both holders and film. For those of us processing one sheet at a time the tank can hold a little more and might make a difference on the top edge if you miss it. Depending which versions of the holders you have there may be more/less displacement of volume. I usually mix 500ml and pour in until I see it break the venting hole while squeezing the tank, and have only a few drops left in my mixing vessel.

[tim48v]

Esearing has a good point.
If you're only using one holder, be sure to fill to the "450ml tab" (it will take about 480ml).
Personally, I always fill to the "vent hole" because it's easier to see.

[IanBarber]

Assumes you are using both holders and film. For those of us processing one sheet at a time the tank can hold a little more and might make a difference on the top edge if you miss it. Depending which versions of the holders you have there may be more/less displacement of volume. I usually mix 500ml and pour in until I see it break the venting hole while squeezing the tank, and have only a few drops left in my mixing vessel.

When processing one sheet of film and using 500ml. do you have the other holder in the tank as well or just one holder with one sheet of film?

[tim48v]

Ian,
I leave out the unloaded holder but it really shouldn't matter.

Tim