Results 1 to 5 of 5

Thread: Ansco 5x7 need parts

  1. #1

    Join Date
    Mar 2011
    Posts
    11

    Ansco 5x7 need parts

    Hi All. I'm trying to rebuild a Ansco 5x7 but I'm missing two part and I was wondering if anyone could help me with finding them. The first part is the part on the right side on the top which holds the camera back and the second part is the lock arm which holds the second rails up when you ain't using the camera. I'm adding photos so it easer to under stand what I'm taking about

    One thing at last has anyone found good knob to replace the original ones. I'm missing fees and I would like to get them all done in steel instead of the plastic as they are now

    Thanks Biggi
    [
    Attached Thumbnails Attached Thumbnails IMG_1090.jpg   IMG_1091.jpg   IMG_1088.jpg   IMG_1089.jpg  

  2. #2

    Join Date
    May 2006
    Posts
    118

    Re: Ansco 5x7 need parts

    Quote Originally Posted by biggis View Post
    Hi All. I'm trying to rebuild a Ansco 5x7 but I'm missing two part and I was wondering if anyone could help me with finding them. The first part is the part on the right side on the top which holds the camera back and the second part is the lock arm which holds the second rails up when you ain't using the camera. I'm adding photos so it easer to under stand what I'm taking about

    One thing at last has anyone found good knob to replace the original ones. I'm missing fees and I would like to get them all done in steel instead of the plastic as they are now

    Thanks Biggi
    [
    I would suggest you buy a junker and salvage parts from donner camera. Last year at this time I had to give away my donner Ansco 5x7; nobody wanted to buy it! Sorry!

  3. #3

    Re: Ansco 5x7 need parts

    If I'm fully understanding what parts you need, it seems like you could easily make them out of sheet brass.

  4. #4

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    6,246

    Re: Ansco 5x7 need parts

    You will get a lot of satisfaction from making this from a piece of brass.

  5. #5

    Join Date
    Mar 2011
    Posts
    11

    Re: Ansco 5x7 need parts

    That was my second option But I was hoping to get the original parts for this, but I'm going to make all the knobs in a lathe so I can make those parts at the same time.

Similar Threads

  1. Agfa Ansco 8x10 parts help
    By Dynasty in forum Cameras & Camera Accessories
    Replies: 10
    Last Post: 23-Oct-2014, 09:44

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •