So, I recently picked up a Feisol 3372 CF Tripod as legs for my 8x10 Kodak 2D. I was specifically looking at Feisol's because of the cost, weight, and large diameter mounting base (90mm). After purchase and receiving it, I realized that the mounting screw is 3/8", while the mount on the 2D is 1/4".
While the center column that I received with the tripod has a reversible 3/8" to 1/4" screw, it adds unnecessary weight, height, and stability. I reached out to Feisol, and the only other recommendation they have is to use a release clamp that sits flush with the base, and then use a large Arca-Swiss release plate. While this may be a better option than using the center column, it now adds an additional cost.
I guess my question now is, is it possible to replace the 1/4" tripod mount on the tripod block of my 2D with a 3/8"? I use the tripod block extensively, and would rather fabricate/modify the block instead of mount on the camera itself. Has anyone done something like this? I was also interested in using Feisol's panning and leveling base, but they both have 3/8" mounts as well. I am really trying to avoid using a ball or pan/tilt head.
Bookmarks