Non of these, would be nice if you would ad the older continental formats: 10x15 and 13x18
none.
4"x5"
9x12 cm
5"x7"
8"x10"
Even bigger.
Non of these, would be nice if you would ad the older continental formats: 10x15 and 13x18
4x5, 8x10, 14x17 wish we could poll more than 10 sizes, this doesn't help as much with any concrete data if all the sizes aren't accounted for.
Maybe have separate polls for the smaller sizes and then maybe 2 ULF polls?
What is almost always needed is a thread to discuss what a Poll should contain.
We continually critique flawed Polls.
I answered with the format I currently favor.
Tin Can
It might help for the OP to tell us why he's interested - that would make clearer whether fussing over the odd formats is useful.
Like others, none of my current formats are included:
15x12" and 1/1 plate
18x24cm
24x30cm
30x40cm
ANy questionnaire answer would be very misleading.
"fussing over odd formats" - perhaps rarer is a more neutral comment!
I remember seeing a list of active formats being used currently (2012?).
Per your request:
Now that our SP-445 4"x5" system will be shipping next week (shop.stearmanpress.com), we're looking at the question: "what's next?"
We've had some requests for 9cm x 12cm holders. Of course, people have asked for 5"x7" and 8" x 10".
9x12 holders could be done very easy. Note that "very easily" still will cost upwards of $10K (maybe another Kickstarter?) On the other hand, you could modify the 4x5 holders to take 9x12 with a little scrap plastic and some glue.
We might be able to fit two sheets of 5x7 in the SP-445 tank via a modified "taco" method. Again, it requires a custom mold and everything that goes with it.
Frankly, I'm surprised at the popularity of 5x7 vs 9x12.
No poll is perfect. We just wanted a rough idea of what people are really doing. We also left the Galaxy glass plate option off the poll; figured that was a different subject all together.
Tim, I think you might be able to use some sort of peg system to allow narrower sheets to be used in each film holder, so adapt a normal 5x4 holder to take narrower 9x12 or quarter plate, the same for larger sizes maybe a 10x8 film holder taking 2 7x5 or metric equivalen each side. I can think of a way that would use the same parts to adapt regardless of the size and would be quite inexpensive.
It's a geographic thing, 9x12 is the Continental Europe equivalenet of 5x4 so it's either or, while 7x5 is a US only format, No 7x5 cameras were ever made in the UK/Europe, in the UK we had Half plate instead and Europe 13x18cm.
International backs became standard post WWII and 9x12 & 5x4 DDS have the same outside dimensions, 13x18, Half plate and 7x5 also have the same outside dimensions, it's the same with 18x24 and 10x8 holders as well.
This Forum is largely made up of US members although there's many active members from all around the world, it's also English language. So while 5x4 has always been a UK/US format there are European forums either covering or dedicated to LF in other languages, you'd need to aske French< German etc members about them.
I shoot some 9x12 as I have some pre-WWII German cameras but ironically I'm converting a US post-card format Graflex reflex to shoot modern 9x12 DDS, of course I can use 5x4 DDS but the 9x12 format is less wasteful. All films available on 5x4 are available in 9x12 in Europe.
Ideally you need to be looking at formats available off the shelf, the ones that sell regularly, and maybe where there's a gap in the market that includes the second-hand market. A 10x8 system that could adapt to take 7x5 (13x18).
Ian
I'm shooting 4x5, 5x7 and 8x10, but 5x7 is coming around to be my favorite. 4x5 seems like small format now, but sometimes small format is OK. 8x10 makes me stand a bit farther back from the ground glass than I like, but 5x7 seems perfect in that regard.
Thanks, but I'd rather just watch:
Large format: http://flickr.com/michaeldarnton
Mostly 35mm: http://flickr.com/mdarnton
You want digital, color, etc?: http://www.flickr.com/photos/stradofear
Well, I'm not. The 5x7 cameras have been mass produced in the U.S. for over 100 years. Still being made, in fact. They're well built and many are still around. I bought a Gundlach Korona 5x7 made in 1926. It's pretty! It came with a 4x5 back, so there you go. Two for the price of one--right there. I have considered 9x12, but none of them really caught my eye. And, that format has less film choice and is hard to find in U.S. Also not sure how to scan it.
Kent in SD
In contento ed allegria
Notte e di vogliam passar!
Bookmarks