200 mm Imagon mount for Graflex

[hendrik faure]

Bob,
I did not suppose, that the ring might be still available, "nearly new" meant compared to my other lenses.
I will ask there. Thank You

[hendrik faure]

I adressed to Rodenstock, they answered promptly, but no rings available and in their archives no information about the thread.
b.t.w. Rodenstock today is called Qioptiq Photonics GmbH & Co. KG.
Strangely their office is registered in Göttingen 500m from the place where I work.
I might have gone there during my lunch break instead of emailing around the globe.

[Bob Salomon]

I adressed to Rodenstock, they answered promptly, but no rings available and in their archives no information about the thread.
b.t.w. Rodenstock today is called Qioptiq Photonics GmbH & Co. KG.
Strangely their office is registered in Göttingen 500m from the place where I work.
I might have gone there during my lunch break instead of emailing around the globe.

Good luck. The ring is actually two parts, the threaded ring and a spacer ring. Qioptiq is actually an American company.

[Jac@stafford.net]

I have a 200 Imagon that covers my 8x10 camera. It's a great lens.

Are you kidding us? Or do you simply enjoy profound vignetting on 8x10?
Can you share some examples for us, Mark?

Thank you

[MMELVIS]

You can try a Breeze V-band. I have used these when I did not have a flange.

[EdSawyer]

This is the flange/ retaining ring you need: for a compound 3:

Ebay item 231724821303

[hendrik faure]

...why did I never think about breeze v- band?
and compound 3 retaining ring at least has correct diameter and is payable.
so I ordered one and will report later (shipping to germany and passing custom highwaymen takes two weeks at least)
thanks everybody so much
h.

[hendrik faure]

8x10? Can you share some examples for us, Mark?

Imagon 200 covers at least 4x5 anyhow. This I took yesterday with green filter (have not gray unfortunately).


(scan)

[Bob Salomon]

Imagon 200 covers at least 4x5 anyhow. This I took yesterday with green filter (have not gray unfortunately).


(scan)

Yes, but now the amount of halo at the preferred aperture and print size will not necessarily be what you would expect when it is enlarged, it would be with the 250. Also the edges and corners seem to be falling off in exposure and resolution.

[Mark Woods]

Hello All, this is an image I shot with my 8"x10" V8. It's a 200mm Imagon with no disk and wide open. The scanned print is 11"x14" & the print is split toned.