Results 1 to 5 of 5

Thread: Contact Printing

  1. #1

    Contact Printing

    I posted a couple of questions on Photo.net about the above subject. One or two individuals said they just put a piece of glass over "vacuum board". I can not figure out what this is. I don't think it is a contraption, I think it is some kind of board you can purchase as is. Anyone? What is "vacuum board"?

    Thanks
    Paul

    www.wideawakephoto.com

  2. #2

    Contact Printing

    Paul -

    By vacuum board they probably mean a vacuum easel. It's a fairly expensive easel that has a vacuum pump attached to it. The vacuum serves to put suction on the paper and hold it flat. It works great, but they are expensive.

    You can buy a contact frame from any number of places, plus on eBay.

  3. #3

    Contact Printing

    I rigged up a vacuum frame (using a shop-vac, some pegboard, a frame I made from scrap wood, and some glass). Although the vacuum frame did exactly what it was supposed to do, at 8x10 there is no discernable difference between the vacuum frame and a good quality spring-back frame. (Note that I _wanted_ there to be a difference after I went through the exercise of making the vacuum frame...but even under a 10x loupe there was no difference that I could find.)

    It's my understanding that for larger negatives a vacuum frame eventually becomes a necessity. But at 8x10, a simple spring back does the job just fine. Since my largest camera is 8x10, the vacuum frame's been disassembled and I'm back to using the spring-back frame. The frame I'm using set me back less than US$50 on eBay...bargains are there to be had if you're patient.

  4. #4

    Join Date
    Aug 2001
    Location
    SF Bay Area
    Posts
    2,707

    Contact Printing

    Hi Paul,

    A spring back frame is all that you should need for 8x10 or 11x14 contact printing. My experience with a vacuum board has been for horizontal projection printing of 8x10 negatives. One beauty of contact printing is the simplicity. Get a good frame and it will last you for years.

  5. #5

    Join Date
    Dec 1997
    Location
    Baraboo, Wisconsin
    Posts
    7,697

    Contact Printing

    See my response to your two questions, particularly the second, in photo.net.

    I don't think anyone said they put two pieces of glass over a vacuum board. Several people said they just used two pieces of glass in lieu of a dedicated contact printing frame. Two pieces of glass means two pieces of glass, one on top of the other with the negative and paper in between. I don't think it's a very practical method for prints larger than about 8x10 because the glass has to be heavy to keep the negative and paper in perfect contact and in my expeience at least it's difficult to set the top piece of glass down on top of the negative and paper without the negative moving a little but maybe I'm just clumsier than the people who use this system.
    Brian Ellis
    Before you criticize someone, walk a mile in their shoes. That way when you do criticize them you'll be
    a mile away and you'll have their shoes.

Similar Threads

  1. Contact Printing OLEC Halide Metal Printing Lights
    By Gustavo in forum Darkroom: Film, Processing & Printing
    Replies: 0
    Last Post: 28-Jul-2005, 06:24
  2. contact printing
    By Julian_3496 in forum Darkroom: Film, Processing & Printing
    Replies: 11
    Last Post: 3-Oct-2003, 13:19
  3. Contact printing - AZO etc
    By tim atherton in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 15-May-2001, 13:47
  4. Contact Printing
    By Todd Frederick in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 5-Oct-1999, 01:29
  5. Contact Printing
    By doc in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 21-Aug-1999, 14:44

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •