Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Zone VI enlarger questions

  1. #11

    Join Date
    Nov 2007
    Posts
    16

    Re: Zone VI enlarger questions

    This has been on the Denver craigslist for a while.
    It doesn't specify Type I or II though.
    http://denver.craigslist.org/pho/5445047650.html
    Bryan

  2. #12

    Join Date
    Dec 1999
    Location
    Forest Grove, Ore.
    Posts
    3,696

    Re: Zone VI enlarger questions

    Quote Originally Posted by piton View Post
    This has been on the Denver craigslist for a while.
    It doesn't specify Type I or II though.
    http://denver.craigslist.org/pho/5445047650.html
    Bryan
    Nice find. From the relative dimensions of the 7" format length, I make the overall length of this carrier to be approximately 12" long. Given that the length of a Type II negative carrier is 15.75" in length, which is nowhere close, I would appear that this negative carrier is a Type I.

    However, unless the Type I head with this enlarger is the replacement model produced by Calumet, the head will not adequately cover 5x7. There are multiple threads on this topic in the archives.

    In order to tell, if the control box is quite heavy and large, has separate knobs and switches for both blue and green, and connects with the head via a thick, about a half-inch group of wires, it's the original head. (The control box for the replacement head is relatively light-weight, has three knobs on it, and connects to the head via a phone wire.)

  3. #13

    Join Date
    Mar 2005
    Location
    Alaska
    Posts
    299

    Re: Zone VI enlarger questions

    I have made several Zone VI lensboards. They are simple sheet steel, about 18 gauge, and can be easily cut with tin snips and hand filed. Much cheaper than anything you can buy now or have made.

  4. #14

    Re: Zone VI enlarger questions

    that looks perfect. I can't be 100% sure, but that matches the relative size and design of what i would think the lens board would look like

  5. #15

    Join Date
    Oct 2012
    Location
    Portland, OR
    Posts
    619

    Re: Zone VI enlarger questions

    Jason,

    read this thread: http://www.largeformatphotography.in...on-lens-boards

    Based on the information I received there I cut out lens boards from acrylic on a laser cutter.
    If you have a maker space near you they may be able to help you manufacture the parts you need.
    If you call calumet you might have luck asking for the parts. I believe they did have some lens boards, not sure about negative carriers, back in 2011. Ask to talk to someone in the tech department.

    The Zone VI is a fun system, lots to learn, and lots to finesse. enjoy.
    ~nicholas
    lifeofstawa
    stawastawa at gmail

  6. #16
    Vanannan
    Join Date
    Nov 2004
    Location
    Isle Of Man
    Posts
    503

    Re: Zone VI enlarger questions

    Quote Originally Posted by jasoncliffordchampagne View Post
    Hi there everyone! I was recommended this blog by the manager of the community darkroom in my city (Ottawa, Canada) as a great resource for information and knowledge. As it happens I need some.

    I recently inherited from what appears to be (I have done a good amount of research) a Zone VI type 1 5x7 enlarger. http://www.ebay.com/itm/Zone-VI-5x7-...d=331658603704 this is the model I have.

    I have tested it throughly and it appears to be working fine, but I have had a few issues and problems that I can't seem to sort out on my own. I'm hoping to get some guidance. First off, the enlarger came with (I will take pictures if needed for the sake of specificity) a zone vi compensating timer, and a zone vi cold light stabilizer. So far, it seems I can only connect one in at a time, because the Type I enlarger only has jack on the head to plug into. It seems stabilizing the light is important, my question is: Is there any way of plugging both in simultaneously? will just running the timer which has a built in brightness control knob the same thing? should I care?

    Furthermore, I am missing the lens board, and negative carriers. Again, after a good amount of research and roaming the web, it seems like both are in short supply/very hard to find. So, does anyone have any good leads on the enlarger lens boards? can they be made? same goes for the negative carriers. I have made negative carriers before from old mat boards. I have found a few negative carriers for zone vi enlargers online but the enlarger lens boards seem to not exist, especially for a type I enlarger

    I am not able to get rid of this enlarger or buy a new one, so i am determined to make this one work! this will be my first home darkroom, and I will make this happen!

    any and all advice would be greatly appreciated!
    Did you receive my message?

Similar Threads

  1. Zone VI 8x10 Questions
    By anton orlov in forum Cameras & Camera Accessories
    Replies: 10
    Last Post: 15-Sep-2014, 05:32
  2. Zone VI 4x5 questions
    By Murray in forum Cameras & Camera Accessories
    Replies: 27
    Last Post: 12-Apr-2011, 14:52
  3. Questions about an 8x10 zone vi enlarger
    By cowanw in forum Darkroom: Equipment
    Replies: 4
    Last Post: 4-Jun-2008, 13:34
  4. Zone VI camera questions
    By Joseph O'Neil in forum Cameras & Camera Accessories
    Replies: 12
    Last Post: 19-Oct-2007, 05:17

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •