Help replacing the handle on a Graflex SLR

[ScottPhotoCo]

I used handles from Bretton Village: http://www.brettunsvillage.com/trunk...ts/handles.htm The part is TH-16, cost is $10. THey aslo sell brass brackets, you can follow the link from that part listing. I used 2-56 machine screws to hold mine on

m

Thanks Michael!

[HMG]

You might also use rivets like these.

[Michael Cienfuegos]

You might also use rivets like these.

I decided on the screws, they were easier than the rivets, I peened the ends of the screws so they won't come loose.

m

[RoboRepublic]

I used handles from Bretton Village: http://www.brettunsvillage.com/trunk...ts/handles.htm The part is TH-16, cost is $10. THey aslo sell brass brackets, you can follow the link from that part listing. I used 2-56 machine screws to hold mine on

m

Reviving an old thread to say: I'm having a similar problem, and would love to fix my Super D. The eye sore that is the broken strap gets to me
I tried brettunsvillage's TH-16 strap and it was quite large compared to the original strap- the brass brackets also didn't match the chrome finish. If anyone has a commonly available recommendation I'd love to hear

[Tin Can]

Look for a Saddle shop and pay way more for custom

I prefer Mexican Saddle Shops as they are excellent

A good one in Chicago, but it's walk in for custom

https://www.alcalas.com/

[jnantz]

I braided / tied a lanyard it into the holes that were left from the removed strap ends. I did it in the 90s and it's still working fine. I did the same thing with my Delmar...
https://www.ehow.com/how_6361864_ins...-lanyards.html