Originally Posted by
jaapdijks
Richard and ic-racer,
- I wil contact RH Designs, from their website is sse taht they have made analyzer pro's for 110v.
However i have an analyzer pro that works and will also be used for smaller format works, and of course being a bit of a cheapskate
i would love it if there is some kind of cheap workaround. New anlayzer pro's are approximately 270 pounds sterling that i would rather put in film.
- the chromega is on a standard power supply that reacts normally to the stepdown transformer i have.
Main problem is that the power supply has a combined output for the lamp (24v) and the fan in the colorhead (110v)
and a separate circuit for the timer, input and output 110v.
My guess is that the analyzer pro will not funtion (or not correctly) if the input is 110v instead of 220v.
A new powersupply 220v for the enlarger is probably the easiest solution, but not cheap 350 + Shipping + 21% import duties.
As stated before i would rather put the money in film than in another powersupply.
I have been trying to find a circuitry model for the power supply is have but haven't been able to find one.
If the loop to the timer is just a circuit breaker it should also work with the analyzer pro.
Thanks so far, Jaap
Bookmarks