Copal #0 X-sync problem

[JD Photo]

Hi. I am new here and I am having problems with the search functions so I will post my question here.
I have a Schneider-Kreuznach Super-Angulon 90mm f/8 with a Copal #0 shutter and the x-sync doesn't work. I have tried all my known good cables. The connection is held on with screws. If I take the connection off the shutter body will the switch contacts be accessible?

Thanks

[vinny]

Older shutter, do you have the lever switched to X?
do NOT take the shutter apart.

[IanG]

It's probably oxidation pay for a decent CLA. Most repair shops can doe one for you,

Ian

[koh303]

If I take the connection off the shutter body will the switch contacts be accessible?

Thanks

Yes.

[JD Photo]

newer shutter just X

[JD Photo]

I haven't done anything but now the strobe fires at random if I touch the shutter, wiggle the cable, change the speed. It will fire when I release the shutter but not reliably. Something loose inside? Where is a good place to send it in the southwest?

[koh303]

Most likely easier to buy a different, but working shutter, with or without glass inside of it. It will MUCH cheaper, and FASTER.

[JD Photo]

I talked with Northwest camera repair and he said that there was probably a broken insulator on the sync contacts and it needed to come apart to fix it. The dealer I bought it from wouldn't cover the repair so I sent it back for a refund on his used warranty. Too bad, the glass was mint. Thanks for the responses.