Results 1 to 6 of 6

Thread: Controlling color print contrast by masking

  1. #1

    Controlling color print contrast by masking

    Does anyone know of any publications that provide instructions on how to mask co lor negative film that have a large contrast range. That is, types of films and methods to use.

  2. #2

    Join Date
    Jul 1999
    Posts
    31

    Controlling color print contrast by masking

    Stephen, I just happened to see a web page with the exact information that you need: www.lightroom.com/pages/masking_97.html. This same site has information on Cibachrome/Ilfochrome Classic as well.

  3. #3

    Controlling color print contrast by masking

    The nature photographer Christopher Burkett uses masking to control the printing of his 8x10 transparancies. He gives a brief overview of his process in his new book (Intimations of Paradise), but he does not go into much detail. He does say that he uses as many as five masks to print a single image. I've seen his 30x40 prints in galleries and they are the best I've ever seen. In his book he also says that he spends 2 months a year photographing and 10 months printing -- so I don't think it's a quick and easy process.

  4. #4

    Join Date
    Nov 1998
    Posts
    93

    Controlling color print contrast by masking

    The link above has some good information but the Kodak Pan Masking film is only available in 8x10. I use T-Max 100 developed in T-Max RS diluted 1:15.

  5. #5

    Controlling color print contrast by masking

    I used to make a first mask to record highlights only on Kodak orthochromatic fi lm, then with this mask on the slide, I would make a second mask on Pan Masking film. This is to p reserve the highlights on the final Ilfochrome print. This method is given on an Ilford technical broc hure. The T-Max films have a slight magenta cast that is difficult to eliminate. The t wo previously mentioned films are neutral. An important issue in masking is the exact positioning of the mask(s) on the sli de. I had resolved the problem by building a perforator that placed two 1,5mm holes on the border of th e films that fitted two pins placed in the enlarger's frames. A lot of work. I have now abandoned this process for the new digital process.

  6. #6

    Join Date
    Nov 1998
    Posts
    93

    Controlling color print contrast by masking

    If your T-Max is properly fixed and washed it will not have a magenta cast. I have read that different developers may cause different color balances so my first choice was to use the technique that I use for black and white masking and for me the T-Max RS gave me a nuetral colored negative. I also use Photographers Formulary TF-4 fixer, it clears the negative better than any other fixer that I have used.

Similar Threads

  1. masking for contrast control
    By rodrigo whitaker salles in forum Darkroom: Film, Processing & Printing
    Replies: 9
    Last Post: 15-Jun-2005, 05:53
  2. Controlling Contrast on Graded Papers
    By neil poulsen in forum Darkroom: Film, Processing & Printing
    Replies: 7
    Last Post: 7-Jan-2002, 09:32
  3. Is B&W Print Contrast Affected By....
    By Andre Noble in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 12-Oct-2001, 01:58
  4. print film to match E100VS slides color rendition and contrast
    By giancatarina in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 13-Sep-2001, 20:29
  5. Unsharp Masking with color negative film.
    By Stpephen Willlard in forum Darkroom: Film, Processing & Printing
    Replies: 1
    Last Post: 20-Nov-1999, 01:19

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •