Results 1 to 5 of 5

Thread: B/W developing with Jobo ATL 3

  1. #1

    B/W developing with Jobo ATL 3

    Hi guys

    You once gave me very useful advice, thanks again. So i`ve got another question.

    I want to develop my 4 x 5" b/w negatives with my new machine, the jobo atl 3. So which developer can be recommended to make machine- developings? What do you think about the tetenal emofin 2 steps developer?

    Thank you very much for every information about black and white machine developings!!

    Best regard André

  2. #2

    Join Date
    Sep 2003
    Location
    Canada
    Posts
    386

    B/W developing with Jobo ATL 3

    For my Jobo CPP-2 with the 3010 Expert drum, I use HC-110 for B&W in a single application. Dilution B needs a three minute development time for Tri-X on a rotary processor, you can use a weaker dilution to extend dev time.

    The beauty of the Jobo is that it allows you to control agitation and temperature, this lends itself to E6 tranny, C41 and RA4 colour processing. For B&W processing, I don't believe a rotary processor is critical ....

  3. #3
    Ted Harris's Avatar
    Join Date
    Aug 2000
    Location
    New Hampshire
    Posts
    3,476

    B/W developing with Jobo ATL 3

    Andre,



    I use Rodinal and have for years with my ATL 1000....smaller machine but same principle as the ATL3.

  4. #4

    B/W developing with Jobo ATL 3

    No handling damage- perfectly even processing in an expert drum-small quantities of chemicals-water bath temp control- daylight processing.

    I still do single sheets of 4x5 in a 8x10 tray. Slosh around hard lifting each edge in turn. Just as even as a jobo expert, but I don`t have to set it up. About four times as much chemical tho.

  5. #5

    Join Date
    Jul 2001
    Posts
    32

    B/W developing with Jobo ATL 3

    And don't use Photoflo in the JOBO tanks.

Similar Threads

  1. Manual developing with Jobo 2500
    By Luca Merlo in forum Darkroom: Film, Processing & Printing
    Replies: 13
    Last Post: 4-Oct-2005, 19:02
  2. Developing 7X17 in JOBO with pyrocat
    By jerry brodkey in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 1-Mar-2005, 20:57
  3. Developing procedure for Tmax 100, Jobo CPP-2
    By J.L. Kennedy in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 21-Feb-2005, 07:54
  4. D76+Tri-X+JOBO......developing time
    By Jeff Liao in forum Darkroom: Film, Processing & Printing
    Replies: 1
    Last Post: 8-Feb-2001, 10:05
  5. Film Developing in a Jobo Tank
    By Robert Ruderman in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 31-Oct-2000, 10:27

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •