Wondering whether the rear element of the 150sw will fit through the Arca made Linhof to Arca adapter?
Wondering whether the rear element of the 150sw will fit through the Arca made Linhof to Arca adapter?
why would you want to put a lens that size on a little linhof board anyway?
http://members.iinet.net.au/~cbird/nikkor/sw.html#SW150
rear element is 100mm
The linhof sized boards are 96.55 x 98.75 x 2 mm
what size hole is in your adapter?
NOT GONNA WORK.
I thought it would be tight. Thanks Vinny. So the 150 ssxl sounds like a more viable option...
For the bigger wides (150 Nikkor-SW; 155/200 Grandagon; 165/210 Super-Angulon) you're best off with a 171 lensboard. As the opening in the front standard is necessarily a bit smaller than the lensboard outside dimensions, I don't know if some of these lenses (the MC 210 Super-Angulon being the worst offender) will even fit through the throat of the front standard of a 141 camera.
They are ill discoverers that think there is no land, when they can see nothing but sea.
-Francis Bacon
If you talk about an adapter for the Linhof Technika 4x5" boards, the clearing diameter of the hole is 86mm. The diameter of the rear element of the SSXL 5.6/150 seems to be 65mm. Looks like this one might work.
c&c always welcome!
"The world just does not fit conveniently into the format of a 35mm camera." (W. Eugene Smith)
http://peter-yeti.jimdo.com
Bookmarks