Results 1 to 10 of 10

Thread: Light leak, camera, or darkroom issue

  1. #1

    Join Date
    Mar 2013
    Location
    Grand Rapids, MI
    Posts
    7

    Light leak, camera, or darkroom issue

    I recently bough a new (to me) Burke & James Speed Press so that I could give 4x5 a shot. The attached photo shows 3 of the exposures (out of 8 or so) and demonstrates that I have work to do.

    All negatives seem both way overexposed and subjected to a light leak. The image shows the negatives on a light table. Just holding them up, they appear almost completely opaque at first glance.

    The first two were processed in a JOBO CPA-2 and 3010 drum. The third was tray processed. Two different film holders were used. Exposure times were varied by several stops (via shutter speed changes). The shutter speeds used (from 1/25th to 1/200th) *sound* about right, or at least they sound quote noticeably different from each other. For example, the 3rd negative was shot at f11, 1/200th. Another exposure taken immediately following was taken at f11, 1/30th. They look nearly identical.

    The dark band on the bottom suggest to me a leak between holder and camera, but I'm new to this so I thought I'd ask here.

    Thank you.

    Click image for larger version. 

Name:	image-20121114.jpg 
Views:	108 
Size:	42.8 KB 
ID:	94864

  2. #2
    8x10, 5x7, 4x5, et al Leigh's Avatar
    Join Date
    Dec 2010
    Location
    Maryland, USA
    Posts
    5,438

    Re: Light leak, camera, or darkroom issue

    The dark bands are in the part of the negative that would be at the top when the photo was taken.
    That's pretty severe.

    One way to check is to leave your darkcloth over the camera throughout the exposure sequence, so it's shielding the film holder. I clip mine to the camera with a couple of clothes pins. Then it can drape over the back and not come loose.

    Take a couple of shots in one holder with the darkcloth in place, then another pair with the darkcloth removed.

    Make sure your holders are fully seated in the camera. There's a little ridge on the holder just above the opening. That should seat in the camera back.

    As to your exposure...
    Without knowing what film you're using, I can't comment on whether or not it's accurate.
    Use the "sunny 16" rule... f/16 with a shutter speed that's the reciprocal of the film speed for normal daylight scenes.

    - Leigh
    If you believe you can, or you believe you can't... you're right.

  3. #3
    John Olsen
    Join Date
    Jan 2012
    Location
    Whidbey Island, WA
    Posts
    720

    Re: Light leak, camera, or darkroom issue

    Not a darkroom problem since there are relatively less-exposed edges on the film.

    Two different holders would seem to rule out the holders. Except if they were both warped with age or misuse they could fit in the back badly. Or maybe B&Js require special holders?

    Or they could both have no felt left in the slide entrance. Try a shot with dark cloth held over the slide position as you pull the slide and shoot?

    But most likely there's an ugly crack in the bellows. Get a flashlight and a small hand mirror and start testing.

    How disappointing, good luck.

    John

  4. #4
    mandoman7's Avatar
    Join Date
    Jan 2009
    Location
    Sonoma County, Calif.
    Posts
    1,036

    Re: Light leak, camera, or darkroom issue

    How old are your holders? The felt that's inside can wear out and light will get in if you leave the dark slide out for a while. Light can also get in if you're not careful during removal or insertion of the slide, and pull the holder away form its seal. You're leaks are coming from that area, though, rather than bellows leaks, where you'll see streaks that are a little more away from the film edges.
    John Youngblood
    www.jyoungblood.com

  5. #5

    Join Date
    Mar 2013
    Location
    Grand Rapids, MI
    Posts
    7

    Re: Light leak, camera, or darkroom issue

    Thank you all for the comments. I inspected the bellows as suggested with a flashlight and didn't see any light leaks. Then I thought I'd look for leaks when the film holder was inserted. Turns out I wasn't inserting the holder all the way! How I didn't notice that before is beyond me, but that was definitely the problem. The attached image is proof. Taken handheld and JOBO processed (HP5+ in Xtol).

    It's not art, but it's exciting!

    Thanks again.

    Click image for larger version. 

Name:	EpsonScan677-Edit.jpg 
Views:	43 
Size:	94.1 KB 
ID:	94893

  6. #6
    8x10, 5x7, 4x5, et al Leigh's Avatar
    Join Date
    Dec 2010
    Location
    Maryland, USA
    Posts
    5,438

    Re: Light leak, camera, or darkroom issue

    Great news. Congrats. (nice dogs)

    - Leigh
    If you believe you can, or you believe you can't... you're right.

  7. #7

    Join Date
    Mar 2013
    Posts
    28

    Re: Light leak, camera, or darkroom issue

    Super!!! Lovely dogs!

  8. #8

    Join Date
    Mar 2011
    Location
    Berlin, Germany
    Posts
    27

    Re: Light leak, camera, or darkroom issue

    Jack, I made exactly the same mistake when I started with LF... lol! Lesson learned

    Have fun!
    Sandra

  9. #9
    John Olsen
    Join Date
    Jan 2012
    Location
    Whidbey Island, WA
    Posts
    720

    Re: Light leak, camera, or darkroom issue

    OK, now on to the other 1000 small problems you can encounter. Thanks for letting us know of the resolution on this one. It's a good reminder for all of us (or at least me).

  10. #10

    Join Date
    Mar 2013
    Location
    Grand Rapids, MI
    Posts
    7

    Re: Light leak, camera, or darkroom issue

    Quote Originally Posted by John Olsen View Post
    OK, now on to the other 1000 small problems you can encounter.
    I'm beginning to understand that. With large format, the path to a successful image is long and littered with any number of ways to fail. If it were easy it wouldn't be nearly as fun!

Similar Threads

  1. Light Leak or Dev Issue?
    By taberahkj in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 30-Apr-2011, 15:30
  2. Light Leak?
    By revdocjim in forum Cameras & Camera Accessories
    Replies: 13
    Last Post: 6-Mar-2011, 06:56
  3. Help! Light leak?
    By Robert Glieden in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 27-Nov-2008, 20:36
  4. Request Assistance on Light Leak Issue
    By Ben Chase in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 6-Sep-2007, 11:24
  5. CC-403 light leak
    By Bon Manriquez in forum Cameras & Camera Accessories
    Replies: 6
    Last Post: 2-Mar-2004, 22:41

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •