Type: Posts; User: Jim Andrada; Keyword(s):

Page 1 of 48 1 2 3 4

Search: Search took 0.05 seconds.

  1. Re: Scanning 8x10 method Epson v850 super resolution lens

    Well, if you only use the middle 5 or so inches of the negative I guess that will work, but you might want to think about cutting 8 x 10 down to two 4 x 10 pieces and using a 4 x 10 film holder. You...
  2. Re: Scanning 8x10 method Epson v850 super resolution lens

    Are you stitching two scans? If not how can you use the higher resolution lens for 8 x 10 when it only covers a band a little under 6 inches wide.
  3. Replies

    Re: Chamonix Whole Plate Camera!

    It's a marvelous size. I often print to WP from other formats just because I like the feel of the prints in this size. I do have one WP camera and it's easier to deal with than 8 x 10.
  4. Replies

    Re: Going Wide on 5x7

    I use an f90mm Super Angulon with a center filter for 5 x 7. Works fine.
  5. Re: Any telephoto (360mm or above) recommendations for a 4x5 (TK45S)?

    I have the Nikon 360/500/720 set and I'm completely satisfied with the sharpness. My only complaint is that focusing an f/16 lens (the 720) is a bit hard on my 80 year old eyes. I use the 360 and 500...
  6. Re: Making separation negatives from color positive sheet film

    I once tried to make screen printing "plates" by separation. I still suffer from the induced insanity. IIRC I was using a lith film of some kind. I really had no idea WTF I was doing but it was fun...
  7. Re: Should I get a center filter for my 65mm Nikon-SW f/4 & 90mm Sinaron-W f/6.8?

    I use a center filter on my 90mm Super Angulon. But then again I mainly use it on 5 x 7. I use it on 4 x 5 as well because - well, it's already on the lens.
  8. Replies

    Re: IQSmart3 Driver Error

    +1 for Michael - I got my IQsmart 2 from him and he's been a great help.
  9. Replies

    Re: Remove Ektar 127mm from a lens board

    I think I might try some paint stripper - carefully!!!. I'd probably use an artist brush or q-tip to just run a little around the edge of the flange and maybe a bit in the holes in the flange, Then...
  10. Re: Comparison of Howtek 8000 Resolve to Epson V850

    I have a 17 inch Epson P800 so the widest I would usually print is 16". I've done 16 x 20 -ish prints from 120 film that look fine. I don't usually print super large though - some 11 X 14 and a few...
  11. Re: Comparison of Howtek 8000 Resolve to Epson V850

    I think the term "Gold Standard" in this case is irrelevant. What's important is what you think you need to get the kind of results you want with a workflow you're willing to commit to.

    For a lot...
  12. Replies

    Re: cable shutter release, Speed Graphic...

    I had the same issue - finally got a short extension (3" IIRC) and JB welded it into the shutter. Still working fine after 5 - 6 years.
  13. Re: What's considered "high altitude" when it comes to UV filters?

    How high is high? Good question. Tucson is around 2700 feet, which in and of itself isn't so high, but the amount of water vapor in the air can be really low - I think it's the skin capital center of...
  14. Re: Help in ID'ing Japanese 5X7 Wood Camera

    Pictures would help a lot - is anything on the camera written in Japanese? If so I could probably figure it out.
  15. Replies

    Re: Film, scanning or development issues?

    You should put them on the wall. At our ages it can't possibly hurt anything - whoops, maybe something WOULD hurt.
  16. Re: New Photoshop ‘Select Subject’ Feature Gets Even Better

    I'm just being a grump. I tried cloning over my grumpiness with the clone stamp, and fixing it with the healing tool, but I can't seem to save it...

    Maybe a few hours of meditation in your Wet...
  17. Re: Howtek 8000 Drum vs. Epson V850 flatbed scanners

    Once upon a time this used to be a great subject area - I learned a lot. Now it just makes me tired and sorry I bothered to look.
  18. Replies

    Re: Graflex Super Graphic problem

    Glad you got it figured out. I've never had that happen - yet! On the other hand I don't usually let other folks mess with my cameras. I can break enough stuff by myself. Anyhow, glad to know the...
  19. Replies

    Re: Graflex Super Graphic problem

    I'm looking at mine right now, but I don't know what you mean by the "sliding release arms"- do you have a photo??? Do you mean the back that has the ground glass in it and the flip open viewing...
  20. Replies

    Re: looking for repair of a Studio Shutter

    There's Carol at Flutot's in LA. I've had a few shutters repaired and she does good work.
  21. Re: Review of Linhof Heavy Duty Tripod, comments welcome.

    I have one of those heads, but mine is on top of the monster Majestic tripod with a right angle arm. I think I could use this tripod to support a car. Nowhere near as elegant as the Linhof, but -...
  22. Replies

    Re: Xenar 135mm f4.7 lens opinion

    This one is definitely not "Apo"

    Nice lens nevertheless depending on the result you're after. Sharpness/contrast isn't always the right metric for a given image.
  23. Replies

    Re: Moon lit scene with Txp 320

    Shoulder replacement mid June - probably unrealistic to think about July. Knees and shoulders are hard. I had a knee done - took a long time. One of the guys at PT had had his shoulder done and he...
  24. Replies

    Re: Xenar 135mm f4.7 lens opinion

    I have a 360 TeleXenar that I also think is somewhat less contrasty than (for example) the Nikkor 360 - 500- 720 set. Makes a nice photo but not sharp enough to "cut your eye" by any means. Not smart...
  25. Replies

    Re: Question about JOBO expert drums

    I'm in Arizona. Nothing takes much more than an hour ir so to dry.
  26. Re: Should I Drum Scan, X1 Flextight Scan, or use the Epson V850 w/Aztek Wet Mount Ki

    @ Sasquatchian

    Well said. It's exactly how I arrived at using the Creo instead of the Epson. I thought about a drum scanner and spent some time with Lenny in California and I finally concluded...
  27. Replies

    Re: Single Travel

    I used to live in Los Gatos before moving to Tucson - had a good friend down the street who was always telling me to not wander around in the mountains between Los Gatos and Santa Cruz. I never knew...
  28. Replies

    Re: endless external HD shuffle Part deaux

    I built a new system last year - 4 x 4TB drives in Raid 10. Plus backup copies on DropBox and Google Drive. And Amazon just started an "all you can store"- unlimited free photo storage so I'm trying...
  29. Replies

    Re: MF (6x4.5,6x6,6x7,6x9,6x12) B&W film images sharing

    A couple

    1) Hasselblad V/150mm


    Zeiss Super Ikonta that my father bought new in 1937. Taken at Shirakawa-go during our last trip to Japan a couple of years back. I lived there from...
  30. Replies

    Re: Question relative scanner performance

    The 700 didn't include the mounting station, the 750 did - I expect it's the same story for the 800/850 but I don't know because I upgraded to an IQsmart and the Epson is holding down a stack of...
  31. Re: Likely Very Naive Question, sheet film then scan to produce a digital print.

    I have to admit I'm thinking seriously about getting a 30 - 40 MP back for my Hasselblad V, I really like the results I get with the 645 but in the end I prefer looking at an IMAGE on a ground glass...
  32. Replies

    Re: lateral arm for gitzo tripod?

    I have a monster Majestic tripod with a side arm I think the tube is 2 1/4 inch - haven't actually measured it - but I've hung an 8 x 10 Linhof Kardan Bi out on the arm for a vertical shot and it was...
  33. Replies

    Re: Changing bags and dust

    Another vote for Gaffer's tape. It's quite good and designed for easy removal. When I did AV I'd use it to tape audio cables onto walls, floors, furniture, etc. I even taped the legs of my mic stands...
  34. Re: Help needed with Wollensak f:4, 11.5 inch Verito

    +1 on using a Packard shutter. You can always get a couple of square plastic Neutral Density filters.
  35. Replies

    Re: Help request - Darlot lens

    I have a nice Dagor in a Volute shutter mounted on my RB67 with an adapter that accepts a Technika-type lensboard so it's perfectly feasible to use older lenses on "more modern" cameras. If the...
  36. Thread: My mistake

    by Jim Andrada

    Re: My mistake

    Yes, and there are no problems either, only challenges and opportunities to excel.
  37. Replies

    Re: explain like I'm 5......... 90mm lenses

    My wide angle lens is a Super Angulon with a center filter. I use it on 4 x 5 (Technika) and 5 x 7 (with not much in the way of movements - pretty much on center only - but it's really wide!)

  38. Re: Arca Swiss Mounting Plate and Ritter 8x10

    The QR plates for Mamiya 645/RB67, etc have pins that fit into holes in the camera body. They don't spin. It's not beyond the realm of possibility to drill a couple of small holes into the camera...
  39. Replies

    Re: Mountain Lion near Santa Cruz

    Bobcats and mountain lions - pffffft. The jaguars are back in the mountains south of Tucson. Google "El Jefe"

    But this is a nice photo - I have to rummage around for a few of a young bobcat on our...
  40. Replies

    Re: Mountain Lion near Santa Cruz

    Well, if she said mountain lion on the roof i think I'd believe her. She lives right up against the mountains and there are a lot of bobcats around - the way she described it, she was hearing...
Results 1 to 40 of 1908
Page 1 of 48 1 2 3 4