Search:

Ok. Now that I have some idea of the temperature, what would you guys say about water quantities I would need for an E6 rinse?

I would like to develop in the smaller Jobo 2523 tank, which requires...

Of course, stabilization is mandatory.

From what you guys are saying, it is ok to use water at room temperature, but it would be recommended to use 33 to 38 degrees Celsius in order to ensure that temperature is not lowered for the next...

Hello,


I am trying to find out what the water rinse temperature should be for C41 and E6.

So far I have processed 4x5 sheet film with a Tetenal C41 kit on a Jobo Cpp.
Because the rinse part...

I recently came across the Graflex Xl camera system, and it is starting to look appealing.
However, while researching it on flickr, I came across some examples of photos taken with the camera that...

@ jody_s

that's exactly what i thought. but after finding my bellows was more or less open, i am not so sure anymore.
in about a week or two i will be able to develop some test photos, and the...

i will test this as soon as i can. one photo with the bellows screws properly assembled, and one with one screw loose.
even by the sound of it, i have a feeling of what the result might be.
...

@ dr tang: you might be right.

while examining the camera, i discovered one of the screws that holds the bellows was a bit loose.
using a flashlight and an empty holder, i could see some light...

@ ic-racer: here are some scans.


118217118218118219118220

I only have this pair which looks closer to normal.

118216

This is the test shot. It's not very well exposed, nor is it a very good scan, but still it's not the same as the images above.


118207

118204118205

118197118198118199118200

hi,

on july 9, 2014, i developed a large batch of 4x5 negatives.
they were part of a project that i had been working on since the month of May.

in all, i had 34 exposures on Portra 400 iso. ...

Vinny, Thanks for the link. Very illuminating.

Also, I had a look at the camera you built.
Amazing skills and beautiful result.

Thank you all for your excellent input.

I have learnt a lot from this forum, and quick, to-the-point responses like this are the reason why.


:)


MN

hi,


i have been wondering for a long time if there is any difference in the quality of processing between the expert drums that jobo sells and the reels for 4x5, and now 8x10 that are available...

for the bellows, did you only use the material you mentioned, or did you also make some rib structure out of cardboard?


thx.

Thanks a lot for the info.

Hello,

I am interested in the 250 mm Fujinons.

So far I knew that there were two of them. The f.9 and the f.6.3.


Now, by looking at two ebay auctions, I discovered a third, which is...

I guess I'll use a more traditional way of attaching the bellows.

A box camera is out of the question, because I would like to use all of my lenses, and have axis tilt for dof control.

Thanks.

So basically it would be wiser to take the magnetic field out of the shutter's way.

Hello,


I am building my own 6x17 camera.

It is a view camera, and I was thinking of using some rare earth / neodymium magnets to attach the bellows to the back of the lens board holder.
...

@ vinny

I am using a Jobo 3010 tank.



@ jim becia

Loading or unloading of film might be responsible for this, I'll have to try again and see what happens.

Hello,


I just developed two shots I made with my new 120 mm Nikkor SW.

The images show what I believe to be significant flaring.

9705697057

At first I thought there might have been...

Thank you for your replies.


@ Nathan Potter

Just to make things more understandable for myself, I drew a diagram of the setup you talked about.

96375

If I understand things correctly,...

Hello,

I would like to change my Ground Glass / Fresnel that came with my Shen Hao TFC45 IIB camera.
https://www.badgergraphic.com/store/cart.php?m=product_detail&p=3165

I found a bright...

Hi,


I am looking for a wide angle bellows for my TFC45 - IIB Shen Hao.
https://www.badgergraphic.com/store/cart.php?m=product_detail&p=3165

I used to have a HZX45, which I used for two years...

Thanks a lot :)

Hi guys,

I am looking at a similar problem as the one in this thread, but from a different point of view. My questions sounds like this.

If D is the distance between the lens and the subject...

This is really useful. Thanks a lot to you all.

Hi guys,

I've been considering buying the nikkor t ed 600 / 800 / 1200 set.

However, only recently have I understood that you need huge bellows draw for these lenses:...

Thanks a lot for this.

Hi,

So far I have been using a 150 mm Rodenstock Apo-Sironar S in urban settings. It handles great when I take shots of objects that are closer to the camera (8 to 10 meters away). However, as one...

I hope this is not old news already. Found it today, while browsing the web.

73333

It seems that Jobo is coming back on the market with a new film processor in 2012.
The unit will cost 2270...

M Wittman and I are using:


no prewash,

330 ml of chems / 10 sheets, as specified in the Jobo 3010 manual

this happened only to this run of film, and mostly damaged the 4 portra 400, and...

I just read this and I have a question.

Would this roll film holder work with my Shen Hao HZX 4X5-IIA Camera?

From what I understand, one should remove the spring back and attach it directly to...

@ polyglot

Thanks a lot, this really makes more sense as to what 'film' is in this situation.

@ vinny

The 5 Liter kit comes from a company in the UK, called Firstcall.

However, you must...

Hi guys,

I just put together all the things I need to start color development of 4x5 film. I have a Jobo CPP2, a Jobo 3010 drum and a Tetenal C-41 kit, the 5 Liter version.

I want to start...