Search:

OK I solved it, in favorites touch and slide to left and select delete.

Hi
Can any one tell me how to remove a camera set from favorites please, I have trien everything including Google without success.

Thank you

https://www.stenopeika.com/prodotto/hyper-camera-5x7-advanced/#:~:text=Hyper%20camera%205%C3%977%E2%80%B3%20advanced%20you%20affordable%205%C3%977%20camera,Categorie%3A%20Affordable%20cameras%2C%20Fol...

Error in post

Thanks for looking Bob.

Best wishes

Tony

Hi Bob the number is definately 26627 on the accessory shoe.

Hi Steve
Although there was a Manxman on the Piquod there is no connection other than my typo, I should have typed Moly (Molybdenum Disulphide) grease not Moby;)

Hi
Thanks for all your advice, I have managed to retract the focus rack sufficiently to access the drive cogs, all cleaned and lightly lubricated with Moby grease, focusing is now really smooth....

Hi
Can anyone help with this please, the focusing is no longer smooth, I guess it needs a good clean and relubricating and to do a thorough job I need to remove the track, I have had agood look at...

Thanks Bob, got it now, old tired eyes at fault:o

best wishes

Tony

Hi
Just purchased one of the above, why are there 3 distance scales and how are they used:confused:

Can't find anything with Google.
My best guess is that scale ranging from 3 feet to infinity...

Many thanks, much appreciated.

Hi
I have tried Google and found nothing:confused:, I am sure one of our LF forum members will be able to tell me the filter thread size for the Fujinon SWD 75mm f5.6?

Many thanks:)

Hi
Just remove the leather from the rangefinder housing,
for vertical alignment look through the aperture in the bottom of the housing you will see a screw,this is the adjuster, just turn one...

Hi again
I have located the horizontal adjustment screw accessed through the aperture just above the flash mounting bracket, all fine now:)

Hi
I know how to adjust the vertical alignment (screw in base of rangefinder), cam anyone tell me how to adjust the horizontal?

Thanks

Hi
I need a measurement for the linhof ST5 210mm lens focusing scale from the 5 feet mark to the infinity mark, can anyone help please.

Thanks
Tony

Thanks for the thought, I'm fairly sure that used non calibrated cams would be ok for wide angle lenses as the focusing scales I have work perfectly, only problem I have is cost, used cams on Ebay go...

Hi
Yes, but I don't have any cams, I find that I can estimate distance pretty well and using my 90mm and 120mm Super Angulons at f11 or 16 on 400 asa film for landscapes my guestimates are near...

Hi
I am currently setting up my 5x4 ST V for scale focusing with my 90mm and 120mm super angulons so I can shoot straight out of the bag when the light is changing rapidly, I have the appropriate...

I had a similar problem, I cannot attempt to give you instruction but I removed the leather from the top and base revealing three screws on each, I removed the top and bottom and 'played around' with...

Many thanks.

Why am I getting the following message

"you do not have permission to access this page. This could be due to one of several reasons:

Your user account may not have sufficient privileges to...

I use the Linhof Quickfix II for 5x4 upwards, for smaller formats I have an arca style clamp mounted on a Quickfix II plate, the Arca style plates are much smaller, tidier and more than adequate for...

Do you have 5x7 inch film holders or are they 13x18 centimeters?

Did you receive my message?

After much experimentation this is the best I have found

http://www.monochromephotography.com/section255920_83802.html

Hi Len
Thanks for the links, I have read about 4 of the APUG pages so far, very interesting but nothing of practical help so far, my Panoram #4 has been converted to use 120 film so I am...

TRA450 weighs in at 6.4 KG, allowing for packing would be in the 5 to 10 KG price band which would be approx. £100 from here on the Isle Of Man, I wouldn't want anything for it but I am sure the...

I threw my Durst L1000 out yesterday I still have the CLS450 head and power supply (220-240 volt AC) obviously I am too far away from you to ship the complete power supply but if you require any...

Hi Len
Thanks for the apug link, I will take a look and see if I can find anything, having attended the TT both as a spectator and working as a photographer for around 50 years I kind of...

Hi
Recently acquired one of the above, the swing mechanism is not working properly otherwise in excellent condition including the bellows, any advice or links that might help me to get it to work...

8X10 is 336mm wide X 390mm high, measurements include sticking out bits rail and rail clamp not included.

I am Vanannan from FADU guessing you can't view photos on FADU so:-143071143073

:)

?

http://www.film-and-darkroom-user.org.uk/forum/showthread.php?t=10653

Hi
Try asking on the following website, Richard the designer of the RH designs range is a member and will probably pick up your question and give a definitive answer.
...

Hi Ian
Thanks again, I will keep looking for a more affordable (hopefully) gold Symmar S 150mm.

Hi Ian
Thanks for the info, I found a 150 Apo Symmar gold on Ebay

http://www.ebay.co.uk/itm/Schneider-Apo-Symmar-150mm-f-5-6-MC-Lens-In-Gold-3106-/161814246916?hash=item25ace17604

Sadly...