Search:

A temprite for beer maybe an option, we use them here for kegs you get from the hotel, buy the beer get the temprite. It has an inlet and outlet and is fitted into an insulated box. Fill the box with...

All,
Maybe an oldy? Any tips for scanning Pyro Negs?
I have a Epson V800 scanner and I wish to cataloge my 8x10 negs
Thanks
Pat

I have just completed my 10 x 20 ft darkroom, two 4 x 5 enlargers on a bench. L 184 on the floor then a 8 ft dry area. Opposite is two fridges then a 12 ft wet bench. between the dry and wet is a 6...

JOBO Lift for expert tanks. Don't need gloves. Check the past post.Will work with all drums.
Pat

I'm looking to move away from a compressor. I'm looking for a small vacuum. I want remove the dust. Not move it around. Loading film and for printing.
Pat

I have the L184, I also have a couple of omegas. If you can go the the durst. Bits still floating a round. I feel a good steady enlarger.
Pat

D.s.,
There is a crowd who may be able to help you.
These guys deal in omega
Pat
http://www.khbphotografix.com/omega/

Nice work all, Even better if the orchids are you own. I have a sizable number of native orchids. No pics yet, will change this winter/ spring here.
Pat

A good floor covering, Easy to clean, low care and place some soft matting where you stand.

If you know somebody with a vertical mill and a lathe you can make your own boards. I did so, had them powder coated. I made 4 for $60.00 aud.
Pat

You need both clips to hold the drum on. Have a look at the Jobo website. Lots of info. Just above those clips is white pin. This slides up and down and selects the path for the top or bottom tube...

I've got the Harrison Jumbo. I load both 4 x 5 and 8 x 10 (JOBO) tanks within this. I would suggest the Harrison Jumbo. More room and less chance of dust.
Pat

Just a little tip,
I went through and used a label gun and placed the filter size on each lens board. As I look at the board I don't have to remember what size it is.
Hope this helps
Pat

Hi,
I use a 121 F8 on my Cambo SCX 810. Dead centre, level no movements, A very slight cutting of the top corners, if three millimeters, I looked at filters, didn't fit any. One day just moving the...

I use a full litre of dev in the 3005

Steve,
I have a cambo 810 myself. I found on flea bay an extender rail for mine. I then cut the rail of my other SCX 45 and made two short rails. The 810 rail is about 10 inches long. I can focus on...

What about darkroom

Kodalk is Sodium Metaborate. You should still be able to get from Bostick or Formulary.
Pat

Very nice will send PM

The drums are2521/2523 to hold one set of 6 sheets of 4 x 5 sheets film in the 2509n reel. When you use the folder ensure you have the black separator end flaps as well. These will stop the film from...

G'day,
And well done
Pat

Hello,
From across the dutch, you'll see later with the spelling.
Pat

I would advise the use of a separate line for the enlarger, The oven will draw more power to heat as the door has been opened and closed and as it heats up. This will not be a problem if you print...

I have posted a video of the 3063 tank running on my CPP2 at speed to check for fouling. I have received many requests which I have hopefully answered. If not send me a private message with you email...

G'day,
See if you can go slower.
Pat

G'day,
I have a D2 which I converted to cold light, the best thing I ever did. Give it a go. Shorter exposure times and great looking prints. Softer means a more diffused light thats all. Have a...

I have almost cracked it............ Two welds and it will be done. I have made an arm for the JOBO lift. This will help when using the expert tanks. Any interested people send me a PM and I will...

G'day,
I was hoping to form a loose group called the "Leaf Shutters" by email. We could have a subject and shoot and then pass our prints around by post. Also if traveling we could meet and...

I'd get a hold of a durst L184 and fit a cold head. for anything bigger go horizontal. with the same unit. By fitting the cold head you save the height of the condensor unit.

I hope this may help somebody

12 head on a Durst L184
G'day,
It was easier than I thought. I picked a ARISTO T12 head a while ago and wanted to fit it to my early model Durst L184. I first...

G'day,
I'll try for the 12th. Work depending. Not sure if I'll bring the 8 x 10 beast. About a three hours drive.
LF PAT

G'day,
I have a Durst L184 with a Tripla board. This holds what looks like three of your lens boards. I also believe that it will fit the smaller models directly under the bellows. Check the Durst...

I have a MICROTEK Scan maker 8700 scanner. I use it to scan my 8 x 10 negs and trannies. I use these in my storage files to display the image.
I purchased the unit on an auction site and are looking...

G'day,
I'm trying to fit my Cambo 8 x 10 into a backpack. I have managed to make a small rail for landscapes and storage. the overall is 500mm wide 550mm high and 230mm thick. Any suggestions??...