Test the printed filter!!!!
Both gepe and Kaiser have angles, but they are longer than the 3-1/4" extension. Gepe 603007.
If you still have problems, time to buy a 3D-printed recessed lens...
Type: Posts; User: Oslolens; Keyword(s):
Test the printed filter!!!!
Both gepe and Kaiser have angles, but they are longer than the 3-1/4" extension. Gepe 603007.
If you still have problems, time to buy a 3D-printed recessed lens...
I have used metal covered self adhesive foam boards for cameras.
Smaller quantities of the black version could be bought at amazon? Just avoid the bad stuff.
Sent fra min SM-S901B via Tapatalk
I saw one made on fb group 3D printing and analog photography.
For Graflex back.
Sent fra min SM-S901B via Tapatalk
In my experience, the use of a paper safe is too costly when light is turned on at the wrong moment
Sent fra min SM-S901B via Tapatalk
If a new negative holder does the job, I suggest getting A4 soft magnetic sheets with the thickness of 2-3mm and cutting a big enough hole.
2 sheets are needed to hold the film in place.
It's...
Or a 55-135 mm when considering the option of cropping?
Sent fra min SM-S901B via Tapatalk
The SW45 has 190 mm of belows.
What do your camera have?
Choose a lens with one of the shortest flange to film distance in order to focus as short as possible. As most lenses stick out back, a...
From
https://www.graflex.org/lenses/lens-spec.html
I find the 180mm Symmar-S MC has the shortest flange distance of 171 mm.
I measure my 70 degree Apo-Macro-Sironar 180 mm to have a flange...
I'm using that one. Without the plug, I would not trust the result. The plug is small, so you can compare the top and bottom of your speed.
The film itself is less concerned about the normal...
The a tin can 120-film pinhole camera with film curved the wrong way had several magnetic shutters ;)
I did not like it, so it went to the next user.
I would worry more about not touching aperture and shutter mechanics than optimization of total distance.
I believe the distance will influence the curvature of sharpness. Test what is important...
I see one for $949 plus the same amount of shipping?
Looking at the manual it might be a top and a bottom fixed to a wall mount.
Looks like it can be done with 80120- t-slot?
Edit:
Long...
Yes, the Wista is brighter. In fact, the brightest of them all, up to 1.5 stop. But I believe it is a combination of fresnel and ground glass, much like in a 135-camera from the 80'. Also, the...
Buy an m39 ring for little money.
It's probably M39x1, and not M39x0.75.
Buy them both if in doubt. Lot of version on ebay.
Did not find the #3, but others
https://learncamerarepair.com/productlist.php?category=2&secondary=3
Sent fra min SM-S901B via Tapatalk
To achieve 1000mm, start with two meniscus of 2000mm, or +0.5 diopter. Place them facing outwards.
Or one +1 close up, facing inwards.
See how that works out.
What format do you need to...
I am curious of where you see the 12.5? Is it a Sinar version? Link please.
Sent fra min SM-S901B via Tapatalk
I believe you are mistaken: The 450mm is f12.5 in a copal #1 and the 600 is f11.5 in a copal #3, but wrongly advertised as f12.5. Catlabs has one listed as such.
Sent fra min SM-S901B via Tapatalk
The 8x10" horizontal may actually come out smaller than the 4x5" enlarger: A Toyo G or Gii should be sturdy enough.
Sent fra min SM-S901B via Tapatalk
Keep it coming! What is the largest format you will enlarge from?
Sent fra min SM-S901B via Tapatalk
Don't bother.
There might be more differences between individual lenses than same-age plasmats from different manufacturers.
Early Fujinon-W are said to be useful on larger formats, so I tried...
I second the importance of light.
The latest 210mm f5.6 all have
neutral out of focus blur.
You may want to stop down a bit to increase sharpness, then a Compur shutter may have more aperture...
Still modify to be done. I bought some frames with glass and aim to make new ground glass.
As I have another 5x7", fixing the darkroom floor and sink has higher priority.
Sent fra min SM-S901B...
I found my 210mm Apo-Gerogon to be sharper in the corners of 8x10" format than G-Claron.
But I also found it not critically sharp until f11+2/3, or around two steps down from the largest aperture....
I have found both 4.5 volt batteries, "A21" in the right size from USA and 3D-printed battery cover from Italy on ebay, but not today.
My $34 Apo-Ronar 360mm cost me more in additional ebay...
What is the size of the rear, please?
Sent fra min SM-S901B via Tapatalk
I would worry less about the size and cost of a power unit when connecting in parallel and worry more about the effect of losing one LED (not short circuit) so the rest get let say 12% more current...
A Copal press shutter. Set the working aperture and mount the lens. Use one cable release to expose and the other one to view at full aperture.
Sent fra min SM-S901B via Tapatalk
If you have a 3D printer, there are files available for view finders.
This one has 60mm diameter, but unfortunately not available without buying a camera
https://www.ebay.co.uk/itm/333648330264?
I have glued on small to medium weight lenses to the lens board using glue gun.
Nowadays the fastest and cheapest is 3D-printing.
Incredible what fiber reinforced plastic can hold.
Sent fra...
That's my point, only import VAT ;)
There could be a German, Danish or French shop with filters? Be patient and something may turn up on ebay.
Jean Cokin is French, but I do not find a 81C...
There's no VAT on export from UK in my experience.
Sent fra min SM-G975F via Tapatalk
This is why the Nikkor-W (95mm), Fujinon-W (86mm) 355mm f9 G-Claron (77mm) Apo-Ronar f9 (58mm) and Fujinon-A f9 (58mm) are popular over the Sironar-N (105mm) Sironar-S (112mm) and Apo-symmar (112mm)....
On my 150mm with the text "Xenar f:3,5 F=15cm D.R.P.a. Jos.Schneider & Co Kreuznach No 28xxxx" is a 43.5 to 52mm adapter. This lens covers at least 9x12cm.
But you might have a different lens....
Sold a 90 angulon without checking the shutter, came back almost in pieces, sold it second time to a friend (who had seen the state of it) who wanted to learn how to repair those tiny shutters.
...
That is $375 after 25% VAT + $49 shipping from B&H, so a no-go, but thanks!
I will try the wet-towel-tricks!
Sent fra min SM-G975F via Tapatalk
Two of my 8x10" Kodak film holders have an arc on each side of the centre.
I have bought quite some film holders, with most faults: extremely dirty, tape missing, cracked folder, cracked frame,...
I would choose the newest 125mm Fujinon-W I can afford.
My 120mm Super-symmar HM is the widest of the f5.6 with the 67mm-filter-thread CM Fujinon-W on next place. If 67mm do not fit with the rest...
The lenses mentioned should be more pricey compared to Symmar and Sironar due to filter size alone.
My 1,4kg 360mm Nikkor-W has 95mm filter threads compared to my 14" Ektar without any, and the...
The next question are, can some of the front fall be accomplished via tilting the bed forward and tilting the standards backwards until horizontal?
Do need the film plane vertical?
Can some of...