Search:

Yes, that helps. At least I can tell which direction the elements should go in. I think I'm close now but it's too dark out to try and focus. There was another ring inside the barrel that I thought...

Sent my 300mm lens from my Fuji GX617 to be cleaned and was told it has seperation in the front lens group, the doublet element. I'm far from a lens expert, but I wanted to take a close look myself...

Try the scan hi-end group on groups.io


Sent from my iPhone using Tapatalk

Just checked, still there. Try this link save it :-) https://web.archive.org/web/20180710020027/http://www.screen.co.jp/ga_dtp/en/download/

Oops, typo. Should have said catalog, not calendar. Link Here

This is from Jobo's 2020 calendar "Pre-Wash
In this context it is helpful to remark that JOBO clearly recommends to always pre-wash
your film (and paper) in rotary processing for 2 to 5 minutes....

It inputs to the cold side of an Intellifaucet D250

It’s in the garage where the Jobo is located. It does exhaust through the existing garage vent which should reduce some if the heat in the garage. It’s the only choice I had.


Sent from my iPhone...

I was finally able to find a used ER301 and a decent price. Now that the temperature and tap water temperature have cooled I'll have to wait until next summer to see if it can successfully cool down...

Do you have the help videos?


Sent from my iPhone using Tapatalk

One nice feature about DPL 8 is the Aperture check feature. You select an area and will automatically scan it multiple times using different apertures. Makes it rather easy to figure out which one to...

If you already have WD 40 laying around, you can spray that into a jar and wait a couple of days for the crap to settle to the bottom. The nice clean machine oil will be on top.


Sent from my...

What did Hugo say about the IG account?


Sent from my iPhone using Tapatalk

How has that chiller worked out for you? I'm thinking about getting one.

Same here.


Sent from my iPhone using Tapatalk

Fairfield


Sent from my iPhone using Tapatalk

Thanks so much!

Is that the paid report? I've only seen the one with the Cezanne, not elite. Is there a link? I would love to read it. Thanks.

I assumed they copied something, I can say that they work great.

I thought I would share this head with you all. I've been using the Luland Sinar head with my P2, and it's been fantastic. So when I went looking for something to support 20 pounds of Toyo 8x10, I...

The notable difference is the Elite scans about twice as fast.

Cezanne Max density 3.9, Elite 4.2
Scanning speed: Cezanne 54 scans/hour (35mm @ 350 dpi and 400% magnification). 47 scans/hour...

Welcome. I sent you an IM in case you want to see a couple of monorails, drum and flatbed scanners in person.

Regards,

Ned

Still useable, but I did change to the sink stopper you suggested.
https://uploads.tapatalk-cdn.com/20200704/fae65fb6d02670b92a1f47f67f819898.jpg


Sent from my iPhone using Tapatalk

Thanks. I thought there may have been some sort of mechanical solution everyone knew about except me :| Tried to find my old mouse pad but ended up sacrificing a Frank Zappa coaster, I'll see how...

See pic, this Bogen studio stand mount spins and locks down, but when I attach the head to it, although I can tighten it, the camera is so large that it's easily rotated. What's the proper way of...

Been doing some C41 test scans and have been noticing that "raw" scans, that is, nothing in the finish cell has much more noise and is not as sharp as "standard." I've scanned multiple C41 slides,...

How to you guys have the energy to keep this going? [emoji15]


Sent from my iPhone using Tapatalk

I'm all sorted now, thanks for the help!

I did thank you. I thought I replied, sorry if I didn’t but it’s alive and seems to be working great!


Sent from my iPhone using Tapatalk

Aztek has a Howtek download section on their website, maybe they driver you need http://www.aztek.com/Howtek%20Pages/Download.html

I'm in the same boat guys. I picked up the elite that was offered in this forum but unfortunately the G4's hard drive was missing. I'm looking for v2.x so I can get this nice machine up and running. ...

I hate to have to resort to this but. I'm another person that just acquired a Cezanne Elite and as it turns out, no software. Thought it was on the computer that came with it, but it's not. No...

Is there a hardware manual available for the elite? Can’t seem to find one. Thanks


Sent from my iPhone using Tapatalk

Lots of copies online, I just paid $24 at Abe books.


Sent from my iPhone using Tapatalk

You were right on this one. I didn't realize that it was a sandwich... and the brightscreen labeled glass is just a clear cover with the grid lines taped onto it.

Cheers,


Ned

You mean the second photo... The glass on the left is the fresnel, to the right of that is the BrighScreen GG. It says BrightScreen on it.

Thanks for the confermation on the OEM GG mounting. I'm going to try it like that and see how I like it.

Cheers,

Ned

Ok so after more testing, the OEM GG does not work with the fresnel I have, but the BrightScreen does. I’ll try to use the oem GG without a fresnel and see if the actual images are in focus. I don’t...

Here are some pictures,first the back.https://uploads.tapatalk-cdn.com/20200523/fc6e43e05f4d1a2bd69c20cc1a99352d.jpg
The way it came to me was with the fresnel on the left installed first the the...

It’s two separate pieces.


Sent from my iPhone using Tapatalk