Search:

The idea of a compact RF-coupled 4x5 camera is to be welcomed. Cameras like the Wista RF and Linhof do need substantial improvement in design and usability.

However, I'm not sure how the film...

Thanks, Louis.

Karl, I can get you any accessories you need for the Toyo system. Please send me a message, or better, an email and we'll take it from there.
To send a message or email, click on...

Seiko shutters were made by the same company that makes Seiko watches, and is now part of the Seiko Epson group. The #0 shutters will take the same lens cells as Copal / Compur, etc. The Seiko #1...

Use a compendium hood on your camera. It will be good for every lens you own, not just the 180mm.

Kumar

Some shutters have a small screw that limits the aperture. Remove the screw and it opens up fully.

Kumar

Does this help? http://www.thalmann.com/largeformat/t.htm

Kumar

Depends on which Wista 45D camera you have. On older models the bottom part is wider. The finder in the photo is for the later model cameras.

Kumar

Please send me a message.

Kumar

@eriet30: Please resend.

Kumar

In addition to my product development efforts, I'm still actively selling! I haven't been listing as much because I get a lot of referrals, and of course, many repeat customers. I need to fund all...

If you have the folding WP wooden bookform holder and the appropriate back, you can make a sheath for 5x8, or whatever size you want. Modern WP plate holders are also available, and will allow the...

What I meant was that you could make a 5x8 sheath and use it easily with a bookform holder. Thse holders were made for plates, and can use sheaths for smaller size films.
I think you mean this kind...

Hello Jose,

I sent you an email.

Kumar

I haven't seen a Horseman 5x7 back in a long time. A Sinar F2 5x7 is easier to find, and thanks to the modularity, you can always get the Norma or P variety. The Arca Swiss is a fine option, though...

I think you mean 6x10? Perhaps cutting 10x12 film in half would be an easier option? Your film choices are a bit more limited, of course.
If you want to use 5x8 inserts, it is best to get a whole...

I don't know if the Linhof plate is the same size as that for Wista cameras.
Please see:...

First, make sure the back tilt knobs are loosened. If they are tightened, the camera will not open.
The button presses down on this spring clip at the top:...

Glad you made a good deal. This has me intrigued. Can you measure the size of the rear gold cell - diameter, height? Perhaps show some close up photos? Is it simply a rear cell that has the black...

Schneider made a set of lenses with gold front barrels for their 125th anniversary. A colored rear barrel would tint the image, so you won't need a warming filter :)
From the photos, it looks like...

I should be able to help you with these parts. Please send me a message.

Kumar

The Super Topcor 120mm f/5.6 lens has an image circle of 160mm, as marked on the bezel around the lens. If the flash sync port is on the board it means the lens is mounted on a Horseman 80mm lens...

Terry,

1. Toyo and Fidelity slides are not interchangeable - one is wider than the other. I will check tomorrow and confirm which one. If the Toyo slides are wider, it should be possible to sand...

This issue came up only with a batch of 4x5 slides. 8x10 slides were not affected.

Kumar

Terry,

The moderators would frown if I post a sales post here. Please see this post I created just now:...

1: I have seen this lens in a Copal 0 shutter, though I don't know if the cells are interchangeable between Wollensak and Copal shutters.
3: If your camera has a side mounted rangefinder it will...

Would an angled screwdriver help?
https://www.amazon.com/angled-screwdriver/s?k=angled+screwdriver

Kumar

Perhaps Karl Hudson can help. http://hudsongrafik.com/

Kumar

I can confirm that the Symmar-S will not fit into a Horseman HF camera when it is folded up. The older single-coated Fujinon 150mm f/6.3 and f/5.6 lenses will fit, as will the 125 and 135mm lenses of...

Toyo spanner wrenches fit Copal / Seiko #0, Copal #1 and Seiko #1 shutters. Copal #1 and Seiko #1 shutters have different sizes. #3 shutters are not supported.

Kumar

Toyo still makes new cameras, though at a much smaller scale than earlier. The lead time on some models can be a few months. Parts for the VX and G and series and field cameras are available.


...

I've been an architectural photographer all my professional life. I still do it occasionally when I find an interesting building and can get access.

For architectural work, a monorail camera with...

Here's a page that has an FAQ on Horseman technical cameras: http://www.kenko-pi.co.jp/horseman/e/faq_tc.html
and a pdf showing which lenses are usable or not:...

Or get a long loupe - Horseman, Toyo and Wista made them.

Kumar

Horseman made one for the VH that probably fits the earlier models as well. Wista also made an inline viewer that fits their 6x9 adapter screens and the sliding backs.

Kumar

Toyo and Horseman cameras use exactly the same kind of folding hood. The only difference, as far as I can tell, is the Horseman hood has a rubber sheet with the name embossed, and the Toyo has a...

For the record, Fidelity slides will not fit Toyo holders and vice versa.

Kumar

Yes, the spacer goes on the front of the lens board.

Kumar

Copal 3 shutters generally come with a spacer ring to move the shutter about 10mm away from the lens board. This also lets the shutter controls be used easily.

Kumar

I expect this is what you mean. It happened to me also, though it was the Toyo version.

https://i.postimg.cc/4y7CxHSJ/Toyo-Super-Graphic-01s.jpg

The latches on the back were separated from the...

No. A new Toyo 8x10 holder costs 15,930 JPY plus shipping.

Kumar