Search:

https://scatteredlightblog.files.wordpress.com/2022/05/sheet0431.jpg

Nacka Nature Reserve south of Stockholm

Chamonix 45H-1 with 4x10 back, G-Claron 240, FP4+

https://scatteredlightblog.files.wordpress.com/2022/05/sheet0429.jpg

Nacka Nature Reserve south of Stockholm

Chamonix 45H-1 with 4x10 back, Fujinon NSW 125mm, FP4+ @f/32 & 1 sec

Thanks!

https://scatteredlightblog.files.wordpress.com/2022/05/sheet0428-2.jpg

Lake Fatburen south of Stockholm

Chamonix 45H-1 with 4x10 back, G-Claron 355mm, Fomapan100 @f/32 & 1 sec

E6 , scan and digital print
BW, optical print or scan and digital print
and the odd C-41 with scan and digital print but I'll never seem to get colors I like

https://scatteredlightblog.files.wordpress.com/2022/04/sheet0424.jpg

Stenstranden (The Stone Beach), with Landsort Lighthouse in the far distance.
South of Stockholm, Sweden

Chamonix 45H-1...

Just finished my WillTravel 4x5 XL 47.

First of all a big thanks to Morten who made it all available on Thingiverse. And was kind enough to supply support along the way.
And I think he can print...

A quick follow-up

226544 226545 226546

Tonight I made the first print with the enlarger. And my first real analog prints in 40 years. Since I came back to photography I've only scanned and...

Well, no. It's been tested and I think it is fairly safe as long as water goes. Well filtered and clean.
Only water though, wine would have been nicer.

I don't know why pictures didn't show up inline, but press links to the attachments

DOn't if this will help but here is my holder and my setup in FlexColor 4

I can get 6300 ppi on 35mm frame at 100%

226321 226322

I'm not really sure I understand but...
At least my Imacon (The Flextight III) has a fixed upper limit on 8000 pixels in width. This can be scaled to any format.
So it matters which way the film is...

Spring at Sandasjön in the woods just behind my home.
Water is said to have magic properties. It tastes good but nothing else has happened to me so far.
...

Nice. Bringing old stuff to life. Love it!

Well, it goes along with what Foma published officially, so why not?
My experience confirms it too.

And for that reason not practical for long night exposures. FP4+ is a much better choice for...

Constructing a filter holder from scratch is somewhat basic as far as modeling goes. But that said you need a basic knowledge of 3D modeling and construction. Otherwise the learning curve is steep....

Just got a Durst Laborator 1200 and needed a few negative masks
Perfect to print

226156

Masks for 9x12, 645, 6x6, 6x7, 6x9, 6x10, 6x12, 24x36, 18x24, APS and 126 can be found here if anyone...

If what you say is true about angle of view it should cover 5x7, even with a little movement.
Interesting. This I'll have to try

It's a sort of a mystery. Not an important or especially thrilling one. But mysteries are always intriguing, aren't they?

Well, yes agreed.
But there are obviously dagor type G-Claron 150mm lenses engraved as "1:11/150" on the front cell. In a different casing compared with the f/9 version and with no filter thread...

I just get a 404 on that link

To start with I thought of 24x30 or at most 30x40. Going larger I just have to scan and print, as I already do.
Thing is that my upper floor only has 195 cm in ceiling height so I anyway have to...

Nice to see more things.

I've just added a Kodak 2-D 5x7 to Linhof lens board adapter to Thingiverse
https://www.thingiverse.com/thing:5331403

226006

Well that is exactly what we did. Run it to the top, wrapped it in loads of bubble wrap, and dismounted it from the baseboard. Worked fine. 500 miles later :D

But my, sort of large, isn't it? Or...

Thanks! No I'm driving down on Saturday.

Thanks everyone for chiming in and for advise.

I ended up winning the auction. I got it for $800 + $150 in gas to pick it up.
A more than fair price I hope, considering the condition and the...

The text states that it comes with a TRA 500 transformer. I don't know if there is a difference of that and the EST500?

225751 225752

Just picked up the new member of the family, a 5x7 Kodak 2-D.
My first 5x7 camera.
Came with 8,25 inch Red Dot Artar
Needs and will get a bit of love but is in working condition....

OK, so I stepped out the last darkroom of my life in 1985. Marriage, kids, graphics, music career, whatever and so on and then back to digital photography in 2016 and then film again in 2018 and then...

https://scatteredlightblog.files.wordpress.com/2022/03/sheet0401-1.jpg

Nacka Nature Reserve outside Stockholm, Sweden

Will Travel XL 47 camera, Super Angulon 47 XL, FP4+ @ f/22 & 4 sec

For example at this link https://www.catlabs.info/product/ground-glass-protector

https://scatteredlightblog.files.wordpress.com/2022/03/sheet0363.jpg

Grönfjäll to the left and and Klippfjäll to the right.
Lapland in Sweden

Chamonix 45H-1 with 4x10 back, Fomapan400

Many thanks

https://scatteredlightblog.files.wordpress.com/2022/02/sheet0392.jpg

Gammelström (The Old Stream) south of Stockholm, Sweden

Chamonix HS-1, Super Angulon 75/5.6, 9x12 (croped) and FP4 @ f/40...

You've got a nice progression of good lenses. Why sell, unless you need the money.
Except perhaps for the 250 Soft Focus there is no bummer, and the 250 is not a bummer just a little odd compare to...

Thanks!

https://scatteredlightblog.files.wordpress.com/2022/02/slf0308-017.jpg

A short walk from the back of my house.
Contax G2, Biogon 21/2.8 & Shanghai GP3 (expired 1989)

I'm using 3.5 as the devisor which is approximately equal to 0.29.
But since the ratios are different there is no right or wrong.
Don't waste to much time...

And then try to equivalent 4x10 to...

For those of you who got the Reveni-Labs spotmeter here is a holder and protection for the lenses.
Also keeps the buttons protected from being pressed when stored in a bag or pocket,

224739 ...

I created and printed adapters, thin 100mm filter holders and protecting caps for my centerfilters. A 67/86 Schneider III and a 82/112 Rodenstock.
Especially pleased with the larger one since it...