Search:

Type: Posts; User: Michael Kadillak; Keyword(s):

Page 1 of 94 1 2 3 4

Search: Search took 0.12 seconds.

  1. Replies
    5
    Views
    175

    Re: Nitrogen Processing

    Glad that you got things figured out Roger and thanks for sharing. Persistence as they say pays dividends and you were surely persistent.
  2. Re: Durst 184L Color Enlarger Schematic Question

    Thanks for the response. Yes, I was able to ascertain that it is a through bolt and found that a 10-32 bolt 1 1/4' with a lock thread bolt on the other end worked fine. I was able to get the gear to...
  3. Durst 184L Color Enlarger Schematic Question

    A Durst Color L184 enlarger happily made its way to my house / darkroom last week and in setting it up I noticed that somehow I am missing the bolt that connects the wheel under the baseboard that...
  4. Re: Your Best Photograph from the Previous Month - Critique and Discussion Encouraged

    Hang in their Steven. A door closed because another door needs to be opened for you. I have gone through this cycle four times in my career and retrospectively I was in a similar state of what I call...
  5. Replies
    8
    Views
    393

    Re: K.B. Canham DLC2 4x5

    I owned the 5x7 version of this camera and sold it. The reason why is I fundamentally do not feel a camera with only a relatively small base tension screw / compression screw is that is the small...
  6. Re: Thoughts About Linhof 4x5 Technikardan 45s ?

    I had Camera Bellows make my TK45 Straight Taper Bellows out of the Canham synthetic bellows material because it is very light weight and is a durable material. That being said I do have a bag...
  7. Re: Thoughts About Linhof 4x5 Technikardan 45s ?

    I had Camera Bellows make me a straight taper bellows and I take it off and put it on each time I use the camera since on the TK45S it takes all of 5 seconds max. When I fold the camera I cut a piece...
  8. Re: Night vision solution for brush development / general D.Room work

    I would love to be able to answer your question with some of my empirical experience, but unfortunately I do not expose Tri X in my work flow. My primary sheet films have been FP4+, Delta 100, T Max...
  9. Re: Night vision solution for brush development / general D.Room work

    I have been using an IR night vision monocle for over 10 years now and in a controlled environment like a darkroom where it is not subject to abuse, it should have a long serviceable life. The...
  10. Re: Have you found exotic developers worth it for 8x10?

    Understand completely where you are coming from Steve K. The peace of mind of ensuring an optimal outcome from a series of input variables however cumbersome or challenging it may turn out to be...
  11. Re: Have you found exotic developers worth it for 8x10?

    If it meets your expectations, then stock up on HC110 and stay the course. in this situation there is no right or wrong. There is only what limitations or satisfaction criteria we place on ourselves....
  12. Re: Have you found exotic developers worth it for 8x10?

    I use whatever developer and go through the necessary hoops I need to (order chemistry, mix it myself and wear breathing masks and gloves) in order to gives me the look on the print that I am after....
  13. Re: Removing a 21" Kodak Ektanon from a Prism

    Received the set of micro screw drivers from Harbor Freight and was able to unscrew the three tiny set screws holding the barrel lens in the square metal housing and use the strap wrench also from...
  14. Replies
    14,392
    Views
    3,688,208

    Re: Large Format Landscapes

    Very nice image. For me my eye is looking for an extension of the reflection in the lake in the left foreground extending to the center and right foreground. A wider angle lens and a lower camera...
  15. Replies
    13
    Views
    759

    Re: Btzs tubes: 8x10 issues

    If the sheet film moves during development in any tube, that is a risk on event that one cannot tolerate relative to the final product of a perfectly processed 8x10 negative. And bthe foo question...
  16. Replies
    13
    Views
    759

    Re: Btzs tubes: 8x10 issues

    I saw the older videos from Fred and had a set of the 4x5 tubes a while back. Your comments point to my personal avoidance of concentrated developers. I opt for more dilute developers that afford me...
  17. Replies
    11
    Views
    463

    Re: Gitzo 1349 Mountaineer Sticky Leg

    Update on my Gitzo 1349 tripod sticky leg issue.

    I ordered a set of the replacement black plastic collars from Manfrotto/Gitzo and after unscrewing and rotating out the receiving tube the...
  18. Replies
    13
    Views
    759

    Re: Btzs tubes: 8x10 issues

    I have used processing tubes in 4x5 through 12x20 and processing "issues" that happened years ago when I started using this technique I felt fell into several categories. First is ensuring the film...
  19. Re: Removing a 21" Kodak Ektanon from a Prism

    Thanks. Ordered them.
  20. Re: Removing a 21" Kodak Ektanon from a Prism

    OK. I was able to find a set of screws on the front of the prism that upon closer inspection allowed a holding bar to be taken off and this allowed the lens on a lens board to be lifted out of the...
  21. Re: Removing a 21" Kodak Ektanon from a Prism

    I am going to try to ensure that there are no inside mounted screws holding the lens in place and if not, the power cord technique is going to be teed up as a first option. Thanks!
  22. Re: Removing a 21" Kodak Ektanon from a Prism

    Great suggestion Michael. It appears that there are some small screws on the exterior of the prism that may allow me to take out the outside transparent cover of the prism and possibly other...
  23. Re: Removing a 21" Kodak Ektanon from a Prism

    195790195791195792

    As per suggestions attached are images showing the prism with the last image showing the bottom section of the barrel with one section coming off of the top section of the lens....
  24. Re: Removing a 21" Kodak Ektanon from a Prism

    Clear up your PM space and I will send you photos. Trying to send you a PM.
  25. Removing a 21" Kodak Ektanon from a Prism

    I just acquired a really nice Kodak 21 1/4" Ektanon that was shipped to me in a Kodak 3.5" prism.

    The bottom of the barrel lens screws out and the bottom of the front element but not the front...
  26. Re: Unsharp Masks - When Not Worth the Effort

    I shot a lot of Super XX as well and still have some in the freezer as we speak. I was able to make my case and that yes, there are absolutely plenty of new places one can go. I am not intimidating...
  27. Re: Unsharp Masks - When Not Worth the Effort

    Yes, it is my understanding that Ansel was excited about his water bath development technique and used it but never resorted to masking. Probably a product of his time. What has changed since then....
  28. Re: Unsharp Masks - When Not Worth the Effort

    To my earlier question. It is entirely technically possible (and I have been capable of) producing N+3 to N-4 negatives that print conventionally with a modest (if at all) aesthetic minimal...
  29. Re: Unsharp Masks - When Not Worth the Effort

    Please let me know what these issues are because I have never experience them.
  30. Re: Unsharp Masks - When Not Worth the Effort

    I get your point but let me add some perspective. This darkroom technique is like walking to you (hence your ability to refer to it as another tool in the tool box) but may not be for someone else...
  31. Re: Unsharp Masks - When Not Worth the Effort

    Based upon a previous discussions with fellow photographers on this specific topic I did some research and learned that masking is factually a "compromising" craft that sacrifices some part of the...
  32. Re: Unsharp Masks - When Not Worth the Effort

    When working in B&W why not just assign your full dedicated commitment to producing a bullet proof negative that occasionally could use just an minimum dodge and burn aesthetic easily managed without...
  33. Replies
    13
    Views
    759

    Re: Btzs tubes: 8x10 issues

    I have processed film in tubes with screw on caps and 3" plastic tubes with rubber end caps on one end and glued hard plastic end caps installed and never ever had a light leak. The odds are that the...
  34. Replies
    40
    Views
    1,883

    Re: Preferred Format, and why?

    I shoot 4x5, 5x7, 8x10, 11x14, 8x20 and 12x20 and no question 8x10 is the format that I find is the harmonic of "seeing" and "executing". The GG is of sufficient size to be able to inspect properly,...
  35. Replies
    13
    Views
    759

    Re: Btzs tubes: 8x10 issues

    Eliminate risk variables one at a time. First, isolate the issue to ensure that your film holder is not leaking. Develop a sheet directly from the box and go on down the line. In holder then in...
  36. Replies
    77
    Views
    2,991

    Re: Nikkor M 450 F9 - Question

    Back to the original post. I have the Fuji 450C and several of the Nikon 450 M's and have shot both on my 8x10 Intrepid Mark II with no problem. The camera handles the Nikon lens quite easily.

    On...
  37. Replies
    11
    Views
    463

    Gitzo 1349 Mountaineer Sticky Leg

    The middle leg section of one of the legs on my Gitzo 1349 Mountaineer carbon fiber tripod started to bind at near full extension recently which rather surprised me since I had not regularly had it...
  38. Replies
    28
    Views
    1,795

    Re: Pump for easel vacuum

    Enterprising people enterprise. Photographers make photographs. One needs to decide which is your calling. I do not see the incremental improvement in what has proven quite proficient decades ago in...
  39. Replies
    28
    Views
    1,795

    Re: Pump for easel vacuum

    I got mine several years ago Gary as a backup to my existing vacuum pump for about $50. It was their in house brand. Now it appears that they are selling a 2.5 CFM automotive vacuum pump for $89 on...
  40. Replies
    28
    Views
    1,795

    Re: Pump for easel vacuum

    Found an inexpensive but fully capable vacuum pump at Harbor Freight. Works like a champ and cheap.
Results 1 to 40 of 3723
Page 1 of 94 1 2 3 4