Search:

Like!

All I will say is

My V700 can scan/save very underexposed negs

Some so thin, I almost saw nothing on neg

But I no longer scan for DIGI printing

Very nice!

Maybe

Try it

Some here suggest using 1/2 Box ASA/ISO speed as starting point for SHEET film

I shoot Ilford HP5 which is factory rated at 400, at 200 ASA/ISO

Many more will suggest insanely complicated...

Yes

Just do it

Shoot process repeat

THE LAYTON L-45A

http://www.johnlaytonphotography.com/layton-camera

Great link, I never saw before

This tidbit also interesting

"One Circuit printing frame 8" x 6 feet"

Thank you

Like!

Way back when these cameras were first conceived wouldn’t flash have been used handheld?

The smaller ones work best

3" is good

I prefer a single pumper with pin

If I want sync I DIY with Micro Mini switch

You need a good OE bulb to really get it right as the bulb can suck it...

After 70, be retired

and do whatever you want

Cheers!

1-3 are great in a tube

More I like flat

I have done several IRL Print exchanges on this forum

Everybody shipped from Worldwide, I collated and resent

I have one 36X48" DIGI print made in...

I feel very temporary

Danger Will Robinson

So it goes

Sunny 16 works fine

All I used for 40 years

Then I took a Darkroom class

Good to hear!

PE aka

Ron Mowery worked for KODAK designing TF5

"PHOTOGRAPHIC EMULSION MAKING, COATING AND TESTING" BOOK BY RON MOWREY

Available at...

in defence of oddity

I have always prefered old tech, as it was cheap, and anonymous benefactors over decades have given

I thank you all!

I have been studying PinHole for a while, m first...

My 2 floating lid tanks, one 5 gal and the other 2.5 gal in translucent poly made by ARKAY

May be out of production, last week BH had only lids...

Not tested by me past 11X14

However I consider my Nikon 360mm f/6.5 Nikkor-W Lens with Copal #3 Shutter

To be 'mint' and my best lens, also it has gone up in value

Welcome!j

Ok

Very good, and an example of my vision

I am NOT a carpenter

But I am still working on my 14X36" Pinhole/SF Lens one shot camera box and cart

I made the tunnel, and now working on box

It is 18X24X36" OD

The BOX may get a...

Kirk

I fondly recall our lunch meeting

Keep on keepin on

Best answer!

I may try that myself, as I have the paper

I use food grade citric acid powder for paper stop

TF5 was designed by 'PE' Photo Engineer RIP

I think he worked for KODAK

There are many references and examples only on APUG where is was...

I often add SINAR tilt head on top of 100 mm FLM ball

It adds panorama and downward dog

Vaughn

The cart is easily modified and customized for me

Any camera on the new second level may be rotated 360 degrees

It is multipurpose

Load big tripods, lighting, tarp in the lower...

LOL

Since I went to 5 HS, I had no reason to take it seriously

So for the last HS I 'attended' the 30th was 23 years ago

I took 3 very beautiful lady friends, all in their early 20's. We...

If I had an ocean

I would try sea water

I have a camera shipping from Minsk

It is moving

I will report shipping time when it arrives at my door

I gotta ask

Why?

I think that paper is out of production

If not, it is expensive

Very difficult to obtain a pleasurable image

I don't ONE Shot TF5

Must use Distilled

Very economical

I buy a 4 gallon case, as shipping is cheaper

I store in a floating lid tank

Measurement error can ruin your week

I worked 40 years in a test lab constantly measuring similar dimensions

We replaced our 'certified straight' edges at least once a year, we had 50
...

May I also suggest

I use white Gaff tape hand torn into little strips to resize a cap

and found objects also work

but of course it is easier and cheaper to simply buy them

Wonderful!

I wish!

Good!

I know your work

I smoked Camel no filter as kid, best cig, nobody bums

Before that I rolled dry oak leaves

There is very little I have not tried

I want this one good day
...

I ordered my FLM and 100mm ball head Direct from Arri

Some states will add tax

My accountant made me go back years to pay Use Tax

We NEED honest people to PAY TAX

no insult intended