The way I fixed a "leaky Unicolor Drum" for years is very simple. I take out the "Hard Plastic gasket on top of the rubber gasket. Go to Michael's Arts & Craft store and purchase a sheet of...
Type: Posts; User: gbr1000; Keyword(s):
The way I fixed a "leaky Unicolor Drum" for years is very simple. I take out the "Hard Plastic gasket on top of the rubber gasket. Go to Michael's Arts & Craft store and purchase a sheet of...
I've tried cutting a plastic eraser, for some reason, it splits. Is there any other way making spacers?
I had extremely good results using the Unicolor 8x10 drums. Downside is that you can only do 4 sheets at a time, but they are cheap, can be found on Ebay with no problems, plus they use very little...
I am using a 8x10 Unicolor Drum for my 4x5 sheet film. So far I am only developing two sheets at a time. I know about the "hanger" spacers that was describe on this web site, but wondering has anyone...
Just wondering how long would it be safe to keep unexposed 4x5 film in holders. When I go out with my camera, I always come back with maybe one or two holders with unexposed film in them. Instead...
I'm scanning 4x5 negs on my Epson 700. I was wondering if the BetterScanning holders will give me a "noticeable" difference than the holders that comes with the V700 ?
Thanks
Gary
I have a Beseler Color Drum that was found on E-Bay. Works great and it goes in one direction
OK, So I'm thinking about moving from B&W developing to C-41 in my basement. Been looking at the Tetenal C-41 press kit 1 L size to start. Just wondering how many 4x5 negs will this kit do in a Jobo...
I'm just starting out and I'll be using D-76 developer for TMax100 4 x 5. Just wondering how do you figure out how to calculate zone system development times for N-1, N-2, N+1 etc ? I know that in...
Thanks Allen,
I figured maybe it's around that but was not sure, I would say that would be the average since the min. amount for 10 sheets would be 500 and the max is 1000, so I guess 750 would be...
I have the same question. Learned a lot from the thread, but for T-Max 100 developing with D-76, do I used it straight, or 1:1 and how much solution for 10 sheets in a JOBO 3010?
I just purchase a Jobo 3010 and was wondering how much developer should I use in the drum. I'm using D-76 with Tmax 100. Jobo says the min. for 10 sheets would be 500mm. What does must people use...
Thanks Brian for the info. I also have the foot pump and unicolor base. I just need to figure out how to store the chemicals. I was wondering if it's advisable to use a 1 gallon milk container to...
I'm trying to start developing 4 x 5 B&W sheet film. I already have the Jobo 3010 drum. I can use a little advice on what size bottles should I buy, measuring cups, etc..
Any help or advice would be...
Taken with a Wisner 4 x 5 camera with 210mm lens. In my backyard, I had help from my wife, made her take my black focus cloth and hang it in the background.
I love trees. This tree is in a field in Virginia. Shortly after this picture was taken, the empty field was filled with about 50 Rylan Homes. The picture was taken with very expired Polaroid 55...
Looking at buying a scanner for 4 x 5 negs.My choices are, the epson 750 and the Microtek. both approx $800.00 Any suggestions or coments on either of these scanners?
Thanks
Gary
Just want to thank you all for your helpful response. As a newbie in developing sheet film, is nice to come to a place where you get good advise from a friendly group. I'm going to go with 2551 &...
Vinny,
That's an excellent idea about the yellow screw in the battery compartment. I do have a "F: series and doing a little research about this. If all else fails..there's always QLM.
Thanks...
I have a Minolta Spot Meter that needs calibration. Can Anyone suggest a place that specialize in light meter calibrations? Ritter Ritter doesn't do Minolta meters.
Thanks
Gary
I am new in processing 4x5 and was wondering if getting the Jobo 2561 tank with the 2509N reels a good route to go. I do have a Unicolor roller to use with the drum. I don't have a darkroom, just a...
I 'm starting to process 4 x5 sheet film(B&W) I just bought from ebay the Unicolor Print Drum(8x10) as well as the roller. How much fluid should I use for the Unicolor print drums? I have 100 T-Max...