Printable View
Fuji Super HRT (green) 14x17 and tray developed in HC110 (Dilution B). Shot with a 30" Artar and simply contact printed to minimum black onto some junk paper I had laying around (Kodak Polycontrast RC) to Grade 3 with my Ilford VC head. I like all the variation in the skin tones, but I suspect my wife would stop allowing me to photograph her if I showed her this!
I started working last weekend on some photos detailing the area around the Withlacoochee River with my 8x10, with the goal being a large series of 8x10 contact prints both with silver gelatin and Van Dyke Browns. Here is a sample image. You can find about 10 more on my blog linked below in my signature. All are taken with Fuji Super HR-T:
http://www.oceanstarproductions.com/...ing/0045ss.jpg
Spend a couples days in Yosemite... here the shot that was taken with this lens http://antiquecameras.net/blog93.html from Dan on the 14x17 Xray film .
http://img535.imageshack.us/img535/841/oaktre3.jpg
http://farm8.staticflickr.com/7215/7...99953ce4_z.jpg
Eastman View No. 1 8x10 Camera
Konica Hexanon GRII 210mm
Kodak B/RA X-Ray Film
Caffenol C/M
This is an amazing thread.
Thanks to all involved for so much information.
I just got myself some 5x7" MXG and some 8x10" KODAK EKTASCAN B/RA Film / 4153 (single sided emulsion).
I'll try to post comments after I try them out.
Holden,
What ISO and dev times are you using for the B/RA film? (Just got a pack).
Annnnd -- That's a really nice picture!!
Iso 25 in Caffenol for 3:30 seconds. Seems Iso 50 dev times are between 6-8 minutes in any developer so I'm told.Quote:
Originally Posted by gbogatko
3:30 seconds? Perhaps minutes?Quote:
Originally Posted by Holdenrichards
haha
George
Three minutes thirty seconds
Iso 25, then D76 1:1 for 6 minutes. Thin neg, but everything is in there.
Attachment 72925