I've seen contrast filters do the same effect when not positioned properly under the enlarger...are you using any contrast filters with the images above Bazz8?
Printable View
I've seen contrast filters do the same effect when not positioned properly under the enlarger...are you using any contrast filters with the images above Bazz8?
Nice images, Bazz. Out of interest, where do you get xray film in Oz? I've previously tried and found that Oz suppliers will only sell to 'trade', and internet sources will not ship to Aust. for some reason. Very frustrating sourcing stuff for photography in this country. Thanks,
Barry
I have not used any filtration Eric the most frustrating thing to me was the light variation of this enlarger,
so I used my meter and did a reading with the 35mm carrier and light just over the printing frame and the difference was astounding,
almost 1 EV between centre to the edge: the readings below were after a hour or so of repositioning the globe to get the most even light I could!
readings for the light sensitivity:
the light readings are over the area of a A4 size, with a 35 neg carrier the above readings were different by up to 1.5 ev so now having .2 or .3 I can manage that ( I hope)
I did a table of the readings but the upload scrambles them so I have included a I-Phone shot of the readings.apoligies for the dullness of the shot but you will get the idea.
Attachment 114347
Barry Kirsten
Nice images, Bazz. Out of interest, where do you get xray film in Oz? I've previously tried and found that Oz suppliers will only sell to 'trade', and internet sources will not ship to Aust. for some reason. Very frustrating sourcing stuff for photography in this country. Thanks,
This is a pet peeve of mine so perhaps some of our fellow members could purchase 100 sheets and post the box to us, although some of the BS attitudes to postage
from our allies is a little hard to understand, I would be more than happy to send over the funds for another box of the fuji HRT 8x10 + postage cost etc,
I believe that Fuji Australia have the market sown up and do not allow external imports to Australia Barry, the box I got was through my Chiropractor and price was very reasonable $50 AU or so,
he gave the task to a secretary and they then asked her ,she had no clue!what they were going to do with it and all heck blew in, finally after 2-3 phone calls a dealer was introduced and the price went to $110AU.
And that was for 180mmx240mm since as we are metric size users, so my above solution may be the answer for us but I have hit the same barriers that you have.
I got 2 boxes last Xmas from a US salvage store and the price was quite reasonable $38 US each so I sent a message to esquire the combining of postage and buying 2 boxes they had shipping at $58 per box
so I got $10Us of the postage,so back to $170 US: all arrived withing 2-3 weeks total postage cost $38 dollars for both boxes!!!!!!!!! so 38+38+38=$114US more BS 55 handling I presume:mad:. I emailed them but not even a responce.
So xray could be so much cheaper but .....................................................................................................any one who could assist please PM Barry and Barry:).
The dark blur behind their heads is a bush and a little bit of shade as well Stone
Randy, could I see some pictures of that holder??? I'm trying to figure out how to do some holders myself!
Quote:
Originally Posted by Randy Moe
You can find it in DIY, under 11x14 film holder. You can search for it. I would also have to search for it.
Nothing fancy, just tape, plastic and matt board installed on an old copy camera holder.
Quote:
Originally Posted by trundrumbalind
https://farm8.staticflickr.com/7365/...85273fb3_o.jpg
diy 18x24cm camera with diy film holder
Zeiss Tessar 210
Hello! I'm about to build some holders myself, would you mind sharing how you did yours??Quote:
Originally Posted by grzybu
Attachment 116357
Seneca/National 8x10, Fujinon 240mm, f9 lens, F45/6 sec, Fuji HRT Blue X-ray @ 100, D76 1:1, Ilford Multigrade IV RC Glossy, Dektol 1:2
Great photo. I bet that shadow detail is even better on a wet print.