Could be tricky... good luck!
Printable View
Could be tricky... good luck!
Made yesterday - my Son's best friend Eric. KMV, 360mm Graphic Kowa, Agfa green at 400, HC110 dil b, nitrogen burst on hangers. Copy-stand shot with Nikon D2x and 35mm lens. PS3 burning and dodging.
http://i1148.photobucket.com/albums/...ps72b090ea.jpg
Hi there, with the 360 mounted and my subject at about 8 to 10 feet away the bellows weren't completely stretched out. I did shoot a few images closer and still gad enough bellows. I was able to get to within 5 to 6 feet.
Hope this helps your decision. I think you and I got out KMV's around the same time. Take care, Jeromie
https://farm8.staticflickr.com/7310/...9f4d14_b_d.jpg
Scan of Contact print
Kodak 2D 270 mm GClaron Yellow Filter used
Foma Varient Paper used
https://farm3.staticflickr.com/2926/...72139b41_b.jpg
View of Lyndock Hill Restaurant Barossa Valley Sth. Australia
Kodak 2D 8x10
Fuji HRT Green
Lens 270 G-Claron f11 exposure 8 min 14 sec
Scan of Contact print
Auto levels PS
https://farm6.staticflickr.com/5088/...600706b2_b.jpg
https://farm8.staticflickr.com/7394/...12923d1b_b.jpg
https://farm8.staticflickr.com/7368/...f69b4ca6_b.jpg
https://farm8.staticflickr.com/7093/...05a1c213_b.jpg
First portrait shots on the 2D
used a yellow filter all gd2 prints
[IMG]https://farm3.staticflickr.com/2896/...89f05112_b.jpg[/IMG]
same details as last post:)
Bazz, what causes the center burning effect?
Agh. this has been a pain and I finally pinned down the cause,I am using a Durst D659 as a light source for the contact printing frame,
I found the centre of the lit area recieves .1or 2 EV more light than the outside perimater.:(
So I changed carriers to the 6x9 size and kept useing the 35mm side of the enlarger the difference now is minute from centre to edge.
I was seeing the bush behind the sitters and felt that it was more pronounced a exposure than what it is, so my poor positioning of the
subjects is a factor as well, i have 3 more to do tomorrow and I will assess them to see If i have it licked:)