5x7/13x18 daylight processing
Hello everyone
My new Woodyman 13x18 is on his way and I'm preparing to shoot with it soon.
I don't have a light-tight room at home and tray processing is not an option for me. Till now I processed dozen and dozen of 4x5 in a 3-reels-Paterson with a MOD54 with great results and zero isue. I would love to process my 13x18 the same way, 4 sheets at a time, in the same tank.
20thcenturycamera produced a reel for that but it is sold-out (discontinued ?) and I think it is outrageously expensive for a 3d printed piece of plastic...
I think I'll start with the Taco method , 2 sheets at a time, but I'm wondering what are the option for 5x7/13x18 daylight processing nowadays ?
Since I already own 2,3 and 8-reels Paterson tanks I would prefer to use it instead of buying a completely new system... Not to mention Jobo Expert drum prices are absolutely crazy !
I'm OK to DIY if any solution exist, I can even 3d print... I already looked after it on Thingyverse but found only 2 sheets reel.
On E-bay somebody is selling a homemade 3d printed 4 sheets reel for Paterson-3 but they are in Mexico (I'm in France) and it doesn't make sense to me to order from the other side of the planet something I could print at home...
How do you process ? Any advices ?
Thanks !
Re: 5x7/13x18 daylight processing
Re: 5x7/13x18 daylight processing
Bounet makes a 5x7 Paterson “B’s” insert. Not sure if it’s too expensive but just letting OP know it’s out there.
Re: 5x7/13x18 daylight processing
I use the Stearman Press SP-810 with two 13x18cm or 5x7" sheets at a time. It works well. I load it in a changing bag and then process in daylight.
Re: 5x7/13x18 daylight processing
Quote:
Originally Posted by
Tin Can
That would also be my suggestion.
I even wrote a blog about this recently:
https://tinker.koraks.nl/photography...or-sheet-film/
I used PVC drain elements augmented with tape, 3D-printed caps and whatnot, but there are many ways to skin a cat. The 3D printed stuff certainly isn't necessary. There's a liquid rubber kind of stuff that I haven't tried but that I think Tim Layton used on his tubes. It's a lot easier and quicker than my method. The basic premise remains the same, though.
You can load the film inside any changing bag, pour in developer, cap the tube and then do the rest of the processing in daylight. Yes, it's perfectly fine to unscrew the cap at the end of development in broad daylight, pour out the developer and pour in the stop. There won't be any fog unless you work very very slowly.
PS: keep in mind the PVC pipe is generally NOT light tight on its own. You need to add another layer of light proofing to prevent problems; see my blog for an example of what you might run into.
PPS: if you're mechanically inclined, you could upgrade the drainpipe solution with an end cap with a light trap, so the processing goes pretty much like any daylight tank. It's still on my to-do list, but with low priority. I see you've got a 3d printer as well, so you're all set for it provided you can come up with a good light trap design. Opaque black PETG prints easily, is pretty light proof if it's a couple of layers thick and is chemically resistant. I wouldn't bother with PLA in a photochemical environment.
Re: 5x7/13x18 daylight processing
Try and find a Paterson Orbital processor. It does two 5x7 sheets side by side or four 5x4 sheets at once.
Very economical on chemicals but sometimes hard to find.
Mike
Re: 5x7/13x18 daylight processing
I have a couple of 11x14 Unicolor Unidrum II's, and Uniroller. For over a decade I processed four 4x5s in the 8x10 Unicolor II 8x10 Print Drum. The 11x14 Drum will holds four sheets of 5x7, so we will see. Recently a bought a 3D printed four 5x7 reel, for the Paterson five reel tank, from a Guy in Mexico. I intend to test that as well.
The tubes look very promising too.
Re: 5x7/13x18 daylight processing
B&W king tanks, similar to Nikkor 4x5 tank from decades ago..
http://www.bw-king.com
Jobo expert drums work.. IMO, worth the cost. another "penny wise, pound foolish" thing..
Do consider the cost of film and all related beyond the cost of a single film processing item..
Back in the E6 days, a single E6 lab bill can easily exceed the cost of a new Jobo expert drum.. That was during a time long ago and long gone now.
Bernice
Re: 5x7/13x18 daylight processing
Quote:
Originally Posted by
Bernice Loui
...
Jobo expert drums work.. IMO, worth the cost. another "penny wise, pound foolish" thing..
...
Bernice
I have to admit there is truth to this...especially if 5x7 is going to be a long adventure. If not for right now, keep an eye open for Expert Drums to appear for a decent price. I use a motor base to turn the drums (small cost and small footprint) I use both 3005 and 3006 for 5x7. Snag a 3005 -- that way you are ready for the eventual move to 8x10! :cool:
Re: 5x7/13x18 daylight processing
Decades ago, moving from 4x5 to 5x7 caused a film processing issue. Back then (circa 1980's) using a 4x5 Nikkor tank was ok enough, once into 5x7 the Nikkor tank was no longer possible. Tried various 5x7 sheet film processing ways, from tray to hangers to single sheet tubes and etc.. after wasting a pile-O-film and ALL that goes with wasting sheet film (lower cost and more avaialbe back then).. decided to get a Jobo expert drum after being given a semi dead Jobo ATL-1 (the automation parts were dead, converted it to a non-automated Jobo and still works good to this day). That Jobo expert drum cured the 5x7 sheet film processing problems good and done. During the era when film was well out of fashion, purchased a few more 5x7 Jobo expert drums as they were low cost back then..
No regrets as that Jobo became one of the better "investments" to process film. A simple roller base that fits and rolls with direction reversal works too. Negating the need for the Jobo processor. Key item is the Jobo expert drum.
If processing 5x7 film and other size sheet film happens not very often and not many sheets of film and none of the images made are of any importance, GOOD film processing might not be that importaint at all. Film processing becomes deadly serious once the film images become importaint to the image maker.
Bernice
Quote:
Originally Posted by
Vaughn
I have to admit there is truth to this...especially if 5x7 is going to be a long adventure. If not for right now, keep an eye open for Expert Drums to appear for a decent price. I use a motor base to turn the drums (small cost and small footprint) I use both 3005 and 3006 for 5x7. Snag a 3005 -- that way you are ready for the eventual move to 8x10! :cool: