Help with D76 and Txp 320 4x5

This is my first post. Im new to LF and Im having trouble with tri-x320. I am using a unicolor drum and motor base. Im using about a liter/34 oz of D76 1:1, Fix, and Hypo clear. What I am seeing is my film still looks a little pink. Im fixing for approx 10 mins and hypo for 2 mins. I tried this same process with Tmax 400 with now issues. My develop time is 9 min @68 degrees F. I do a 10 min wash in the drum at the end allowing the water to fill the drum and constantly run. I empty the water about 4 times during this process.
My question is does tri x stay a little pink or should it be completely clear? Am I missing something, or doing something wrong? If anyone has suggestions please chime in.

Greg

Tri X is always a bit pink, no worries...

Thanks. I've been getting better results after some trial and error

You might try the Formulary's TF4 fixer.

Attachment 110880

slightly pink

Thanks everyone for your help. My negatives are getting much better. Washing is the key.

Do you pre-soak in water? I pre-soak for five minutes, which I think gets rid of the anti-halation backing. I'm not sure if it is pink though, I seem to remember green.

Yes, the pre wash water is green, but the negative sheet film could stay a bit pink.