Found.
Printable View
Found.
No. Which is not to say that one couldn't be made, just that you can't buy a used original issue one.
Edit: I just saw your WTB listing. A 150 mm general purpose lens doesn't need an additional 80 mm of extension on any size of Crown Graphic. I don't know whether to laugh or cry.
Just having some fun with a different application. Just For the joy of making and being playful.
Oh, dear, are you still riding that hobby horse? Make a rigid cover for the bellows.
Here's a suggestion that works for me. Recessed enlarger boards are available cheap on Ebay. Flip it around and you have a "top hat".
I use brass hobby model screws to hold it all together.
https://farm3.staticflickr.com/2626/...5c9787fd_c.jpg001 by Nokton48, on Flickr
Durst IXOTUB recessed board on the right, unmarked recessed enlarger board on the left.
Daniel, thanks — that’s a creative solution and fits my shoestring budget :)
I could easily also make a Copal 0 end plate that is removable, for easy mounting!
I've made top-hat lensboards out of thin plywood, you just had to make a extension box and attach it to the lensboard somehow, it's not terribly difficult.
https://farm8.staticflickr.com/7545/...6303ce8b_b.jpg2016-07-08 06.11.52 by Nokton48, on Flickr
Another possibility for you, are these anodized screw-together metal tubes (made in China). $20 each they are advertised on Ebay as for "Wista", but I modify mine to fit Plaubel Peco Jr. Nicely made and not too expensive, either. Come in three different lengths, your choice. I have quite a few of these, I keep reordering them as I need them. I lined this tube set with flocking paper from Edmund Scientific.
Shown ^^: 360mm F11 Kern-Arau dialyte on Plaubel Peco Jr board (No; It's not heavy at all. A lightweight set).
You can also see how I trimmed down the original Wista board (also $20) with my power scroll saw and attached that to the Plaubel board, again using teeny tiny modeling brass screws from the local hobby shop.