How to reassemble Pacemaker Speed Graphic focal shutter plate?

Good morning,

I recently bought a pacemaker speed graphic from ebay and a previous owner decided to remove the focal shutter plate and the shutter selector switch. The ebay seller included the parts and pieces but i was hoping someone can provide a photo or two of how the mechanism is supposed to look so i can try to reassemble the plate on to the camera body?

Thanks
scott aka hunn2020

https://imgur.com/gallery/G62z4pl

Have you checked graflex.org?

Yes, I did and I did not see any documentation on it

There are some very knowledgeable people on that forum, with access to drawings and service manuals.
An inquiry on the Speed Graphic Help sub-forum should get you the information that you seek.

Go here: https://onedrive.live.com/?authkey=%...71BC33C77D1008

See Anniversary Speed Graphic

Hello!
Can you provide some photos of the pieces? Folmer shutter which graflexes were equipped with is the easiest thing to reassemble and adjust given that you have all the pieces. They are generally solidly riveted and can't be disassembled in more than two pieces, which preclvents details from being lost.