Does ISO convert to ASA with the new light meters?
My old light meter broke. I was going to buy a selinium Sekonic. It uses ISO. Does the ISO setting on the new meters = ASA setting for film? Or is the digital ISO different from ASA?
Re: Does ISO convert to ASA with the new light meters?
The full ISO number (e.g. 100/21°) combines the ASA and DIN ratings in their 1980's definition. Digital ISO ratings are defined differently, but they substitutable by definition, so that the difference between procedures only would have to interest you if you had to calibrate a camera from scratch without comparison to an already adjusted meter.
ASA and DIN both were significantly reformed around 1960, with old meters and films up to a stop off in some conditions - but in general anything that old will be off by even more due to ageing, and requires recalibration.
Re: Does ISO convert to ASA with the new light meters?
Quote:
Originally Posted by
Iluvmyviewcam
My old light meter broke. I was going to buy a selinium Sekonic. It uses ISO. Does the ISO setting on the new meters = ASA setting for film? Or is the digital ISO different from ASA?
As far as lightmeters go, ISO and ASA are the same to all intents and purposes. Digital camera ISO may or may not be the same, depending on how the camera's manufacturer calibrates it.
Re: Does ISO convert to ASA with the new light meters?
Quote:
Originally Posted by
E. von Hoegh
As far as lightmeters go, ISO and ASA are the same to all intents and purposes. Digital camera ISO may or may not be the same, depending on how the camera's manufacturer calibrates it.
Yes! Good point. The tests at DXOmark.com show the differences between nominal and measured ISO. It's usually within 1/3 stop or less, but you'd want to know if you ever use a dslr as a meter when shooting transparencies.
Re: Does ISO convert to ASA with the new light meters?
Quote:
Originally Posted by
paulr
Yes! Good point. The tests at DXOmark.com show the differences between nominal and measured ISO. It's usually within 1/3 stop or less, but you'd want to know if you ever use a dslr as a meter when shooting transparencies.
Since film speeds are just a suggested starting point the careful worker, analog or digital, should test their system - including the metering system - and tailor it to their preferences. It has always been so. Film speeds were always effected by lighting, exposure, filters, developers, developing time, etc. It was never an absolute.
Re: Does ISO convert to ASA with the new light meters?
Yeah, they mean essentially the same thing right along with EI. They come from different testing criteria but they're equivalent for our purposes and, as Bob writes, they're only a starting point for fine work anyway.
Re: Does ISO convert to ASA with the new light meters?
Quote:
Originally Posted by
C. D. Keth
Yeah, they mean essentially the same thing right along with EI. They come from different testing criteria but they're equivalent for our purposes and, as Bob writes, they're only a starting point for fine work anyway.
Nay nay. EI is whatever you choose to expose the film at, to suit your requirements, developing, printing, etcetera.
I use Tri-X sheet film (ISO 320) at an EI of 200. ASA, ISO, DIN, GOST, and others are all traceable to certain standards.
Re: Does ISO convert to ASA with the new light meters?
I have always understood ASA to be what is printed on the package,and ISO to be the rating which gives you the most pleasing results. I know they are not the same,and ISO was invented by some faceless committee in The Hague (?).
I have rarely found them to be the same. The advice to "expose for the shadows - develop for the highlights has always been valuable.
Re: Does ISO convert to ASA with the new light meters?
Quote:
Originally Posted by
Bob Salomon - HP Marketing
Since film speeds are just a suggested starting point the careful worker, analog or digital, should test their system - including the metering system - and tailor it to their preferences. It has always been so. Film speeds were always effected by lighting, exposure, filters, developers, developing time, etc. It was never an absolute.
True enough for film, but meters are expected to be calibrated to a fixed standard. If you decide you want to expose your ISO 100 film at ISO 64, you still need to set your meter to 64. With a dslr, this will often mean choosing a nominally lower setting.
Re: Does ISO convert to ASA with the new light meters?
Quote:
Originally Posted by
E. von Hoegh
Nay nay. EI is whatever you choose to expose the film at, to suit your requirements, developing, printing, etcetera.
I use Tri-X sheet film (ISO 320) at an EI of 200. ASA, ISO, DIN, GOST, and others are all traceable to certain standards.
Yea, yea. If your definition is the truth, then why does Kodak recommend exposure indices for its motion picture film?