4x10 Film Holder (physical) dimensions

Hey all,

I'm working on an updated version of my field case for the 4x10 format. While it's more of an odd duck format wise, I want to update the design to be more synonymous with my Gen3 cases for 45,57 and 810 formats.
Seein that I only have a single 4x10 holder, a plastic one(likely Canham, made from 8x10 holders), I'm guessing a little on the dimensions of other wooden holders.
Since I know there are other "standards" that were used for this format(Wisner, etc), I wanted to ask here about the physical size of the physical holders(L x W x T)

If I could get some measurements, that would help me out a ton so I can make the pocket set and final fitment as accurately as possible to be able to accommodate as many holder sizes as possible with one single version.

thanks,
Dan

https://www.instagram.com/p/Ca7yIHUp..._web_copy_link

Hello Dan

I have a couple of the Chaminox 4x10 film holders I can send you measurements for.
Can you explain what dimensions you are looking for. L x W x T is asked for, what does the T represent

Dan

Hi Dan,

Thank you for the consideration, and willingness to send the holders. I received an email reply from a customer who sent dimensions on 4 different styles of 4x10 holders he has in-house, so I've been able to work with those dimensions(L-length, W-width, T-thickness) he's supplied.
So I'm gonna close out on this thread, unless for some unforeseen reason, there is something that comes up.

cheers,
Dan

FWIW, here are the dimensions of some Lotus 4x10 holders I have. Length to the tip of the darkslide handles is 12 13/16", width is 5 1/4", and thickness, including the locking ribs, is an eensy bit more than 5/8".