Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expect?
Hi all, so since a Xenotar 150mm f2.8 is way beyond my budget, it got me thinking about putting a standard 150mm f5.6 copal 1 lens into a standard copal 3 f5.6 shutter via adapters for the front and back cells.
So will this set-up make my f5.6 lens a much faster lens?
And what do you think I should expect, image wise?
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
Nope, no more light.
Buy a 150mm f3.5 Xenar in shutter, or a 150mm Heidosmat to front mount, or 58-Copal-to 58mm-filter-adapter to use two +3 close-up lenses to get a 166mm f3.7
Also this will cost you, though.
My bokeh tests: https://www.flickr.com/photos/470525...57634939838558
Sent fra min SM-G975F via Tapatalk
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
The Copal 3 only has 45mm opening.
My Ilex #5 has 65mm opening, but only changes the f stop from 7.4 to 5.1 on a +3 close-up (333mm) lens. If used on two +3 close-up lenses you end up at f2.55 but might want to use a smaller aperture anyway.
I paid $75 each for my adapter ring for my Ilex #5, but found to my surprise the 14" early Ektar will take 72mm filter straight on.
How big shutter do you have room for?
Sent fra min SM-G975F via Tapatalk
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
Quote:
Originally Posted by
MartyNL
Hi all, so since a Xenotar 150mm f2.8 is way beyond my budget, it got me thinking about putting a standard 150mm f5.6 copal 1 lens into a standard copal 3 f5.6 shutter via adapters for the front and back cells.
So will this set-up make my f5.6 lens a much faster lens?
And what do you think I should expect, image wise?
If you want to use that method to increase speed, it is much easier to just fit a new aperture scale. Maybe one that goes to f1.4 :)
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
Back to the drawing board, it seems!
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
What is the intended goal ?
Bernice
Quote:
Originally Posted by
MartyNL
Hi all, so since a Xenotar 150mm f2.8 is way beyond my budget, it got me thinking about putting a standard 150mm f5.6 copal 1 lens into a standard copal 3 f5.6 shutter via adapters for the front and back cells.
So will this set-up make my f5.6 lens a much faster lens?
And what do you think I should expect, image wise?
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
Quote:
Originally Posted by
Bernice Loui
What is the intended goal ?
Bernice
To try and create a Xenotar 150 f2.8 but without the expense!
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
Here is the f3.5 Xenar 165mm, almost there: https://www.ebay.com/itm/26524812608...wAAOSwGO1hBPBj
Sent fra min SM-G975F via Tapatalk
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
Quote:
Originally Posted by
MartyNL
To try and create a Xenotar 150 f2.8 but without the expense!
Fast, inexpensive, good? Which two do you want?
Re: Putting a copal 1 150mm f5.6 lens on a copal 3 shutter via adapters, what to expe
Quote:
Originally Posted by
Dan Fromm
Fast, inexpensive, good? Which two do you want?
Fast and inexpensive. Good is relative.