How does one dismantle and put together a really large and heavy Saltzman enlarger?
I need to move a 8x10 Saltzman enlarger out of someones home. The movers said they would not touch it because it is too heavy so I am going to have to take it apart. This scares the heck out of me because it tends to be easy to take something apart but really difficult to put it back together. I need to somehow remove the base and take apart the counter weights. Does anyone have any experience doing this. Are there any instructions out there on how to do it? Any help would be greatful.
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
I moved a partly dismantled Saltzman twice and still have it
Show a picture of your problem
a few here moved them completely assembled, a really bad idea
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
I have some large Durst Laborator enlargers that I had to bring upstairs. I used a strap cart rated for 600 lbs and hauled them up the stairs. I had to remove some parts to accommodate the width of the stairwell and I removed the head from the enlarger. It still weighed in at 150 lbs and my biggest problem was with the height of the enlarger; the column was about 7 1/2 ft high. It is now in a room with 9 ft ceilings and I can take full advantage of the projection capabilities of this enlarger. It also has the ability to do horizontal projection by placing it on rails.
If you are taking something apart, take photos of it as you proceed so that you know how to put it back together.
Sincerely,
John
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
1 Attachment(s)
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
This person made a wooden frame to assist moving.
Attachment 214988
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
I think I need to take the chain off and remove the counterweights also I may need to remove the bolts at the bottom. Did you do this? I think if I remove the base all of the gears come undone. How hard would it be to put back together. How hard is it to put the chain back on?
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
Quote:
Originally Posted by
Tin Can
Hi Tin Can. How could I talk to you? Also, I do not see any pictures. Do you have directions on how to do it?
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
Before I answer I want a picture of YOUR Saltzman
Talking is no good, writing is easier to remember for you
Learn how to post a picture on this forum, like below, my Saltzman is in storage in pieces in my shed
Here is my smallest 5X7 Elwood, which I can pick up off the floor, barely! Notice the 2 tiny enlargers next to it
https://live.staticflickr.com/65535/...ff76fe97_z.jpgIMG-1572 by TIN CAN COLLEGE, on Flickr
Quote:
Originally Posted by
Andy F
Hi Tin Can. How could I talk to you? Also, I do not see any pictures. Do you have directions on how to do it?
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
Try looking up "drayage" in the yellow pages near you.
1 Attachment(s)
Re: How does one dismantle and put together a really large and heavy Saltzman enlarg
Some Saltzman pictures I found
Attachment 215010