Attachment 199286
Here's one from Worldwide Pinhole Photography Day back in 2012, shot on a Zero Image 4x5 pinhole camera. I don't remember the exposure but it was at least 60 seconds.
Printable View
Attachment 199286
Here's one from Worldwide Pinhole Photography Day back in 2012, shot on a Zero Image 4x5 pinhole camera. I don't remember the exposure but it was at least 60 seconds.
Yesterday, I found my few sheets of 11X14 RC DP which I don't think is sold in USA anymore
I am going to cut a sheet down to 8 4X5 and hope I do better than some years ago...
Thanks for all the tips!
The ISO speed test, I'll need the first few tests (ISO 6 ~ 3 ~ 1.6).
On a cloudless day, can I measure white paper sheet(or white translucent plastic) in front of the exposure meter and then -5 stop?
(I mainly photograph architecture or scenery.)
Thank you for your explanation.
I will try and report the results soon.
Thank you again.
p.s. I can use C1C Universal Lens Calibrator(white translucent plastic) or ExpoDisc White Balance Filter in the field. On a cloudless day, I'm going to measure this in front of the exposure meter.
Has anyone tried specifically controlling contrast with the developer as opposed to a preflash? I would think Selectol Soft would compensate for the contrast to a great degree. I'm planning on doing some experimentation so maybe I'll just report back.
15 minute exposure using a Harman Titan 4x5 pinhole camera and positive paper.
https://live.staticflickr.com/65535/...3344ce50_o.jpg
Truck by Michael Stewart, on Flickr
Nice picture!
Did you take this picture after preflash?