Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
So, I'm down to 3 (err, 4) tripod legs to consider, considering their low weight, height ability, and price. I've read through https://thecentercolumn.com to help aid in this process, but I'm still not quite sure. If any of you could help narrow this down, it'd be greatly appreciated. Here are my top 3:
FEISOL CT-3441T Traveler Rapid Carbon Fiber Tripod
FLM CP30-L4 II 10X Carbon Fiber Series II Tripod
Sirui W-2204 Waterproof Carbon Fiber Tripod
And, because of its ability to use the center column horizontally, here's this (even though it's slightly shorter and heavier than I would like):
Manfrotto MT055CXPRO3 Carbon Fiber Tripod
God only knows what tripod head to pick now...
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
FLM CP30 L4 for the height - Without the smallest leg sections extended my camera is at eye level (on CP34 same height). A sideways center column is not needed for 4x5 if you can rotate the back . If you read the reviews of most tripods that connector has problems. IF you don't need 68" height consider the CP30 S4 instead, more stable per thecentercolumn review. I bought the L4 version because i often find myself perched on a rock in a stream or need one leg farther down the hill.
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
I already suggested FLM https://flmusa.com/product-category/tripods/
If you compare folded length and total weigh between their 3 tallest tripods you may reconsider
I like the lightweight and rigid 100mm half ball on the biggest one
It weighs only 1.5 lbs more and is shorter with 1/2 ball than the little ones with any head
I have many heavy wood and metal tripods, that never leave the cave
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
I have a very old Gitzo 1348 which I think is one of their 1st carbon fiber versions. It is light, 66” tall in four sections, solid without the center column, and never slips. I put a Ries head and a 5x7 camera on the legs and have never looked for anything else. There are loads of styles out there, but a Gitzo is built to last so used is a great way to go.
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
Well, I went with the FLM CP30-L4 II 10X Carbon Fiber Series II Tripod. I emailed Ari at FLM and he was kind enough to give me - a poor, scrappy student - a great deal on the tripod. I'm really excited to get it and use it with my Linhof TK45S and Bronica GS-1 (soon to be joined by the Pentax 67II, which I was also very lucky to get).
Anywayyy, that said, now it's time for me to find a tripod head. Any suggestions for a geared head or pan & tilt head?
Right now I'm thinking of getting one of these (in no particular order):
Manfrotto XPRO 3-Way, Geared Pan-and-Tilt Head
Benro GD3WH 3-Way Geared Head
Manfrotto XPRO 3-Way, Pan-and-Tilt Head Kit
Manfrotto MH293D3-Q2 3-Way, Pan-and-Tilt Head
If this helps, I shoot color negative/transparency with LF lenses ranging from 75mm to 300mm on my Linhof Technikardan 45S and shoot color negative/transparency with MF lenses ranging from 50mm to 250mm on my Bronica SG-1 (6x7 medium format).
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
Arca Swiss d4.
Very smooth, very stable, very precise.
And very pricey.
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
Manfrotto XPRO 3-Way, Pan-and-Tilt Head Kit is fine for my 4x5 wooden camera. Its rated for 17 pounds whereas the geared head is rated only 8 pounds. I like the retractable handles too. Buy extra QR plates for each camera.
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
Quote:
Originally Posted by
esearing
FLM CP30 L4 for the height - Without the smallest leg sections extended my camera is at eye level (on CP34 same height)......
Good tripod but there is a theory that the smallest leg section should always be extended. For us pessimists this means that the joint between the first and second leg sections is high up and out of the dirt, water, and sand that non-studio tripods will inevitably encounter.
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
Being supported on the thinnest sections might well equate to less stability. Extend them a little bit for the reason Maris just explained. But if you don't need the extra height, it's those thinnest tubes which should be left mostly tucked in.
Re: Can anyone recommend a sturdy tall carbon fiber tripod and ball head/pan-tilt hea
Quote:
Originally Posted by
Maris Rusis
Good tripod but there is a theory that the smallest leg section should always be extended. For us pessimists this means that the joint between the first and second leg sections is high up and out of the dirt, water, and sand that non-studio tripods will inevitably encounter.
I thought that was written on every instruction pamphlet for every tripod...:cool: