Need a flange for a Rodenstock 600 mm Apo-Ronar CL

[Ginette]

I search a flange for a Rodenstock 600 mm Apo-Ronar CL. Diameter needed look to be about 112-114 mm. Someone had one or know where I can get one?

Thanks
Ginette

[John Jarosz]

I may have one but I have to go look. It may be for the non-CL version. Anyone know if they are the same size?

John

[Dan Fromm]

If I read Rodenstock's Process Lens Manual correctly, the 600/9 Apo-Ronar CL takes an M110x1 flange. skgrimes doesn't stock them, can make to order.

Ginette, you might want to ask Bob Salomon (posts here often) whether HP stocks them.

[Emmanuel BIGLER]

Pour Ginette de Montréal, qui est peut-être francophone, voici à télécharger la notice de l'apo ronar de 600 mm en français.
Plus : in English and German, the official specs for the Apo Ronar CL 600 mm.

Cliquer ici ! Click here ! Bonne lecture ! (http://cjoint.com/?BFommqp9Ssm)

The non-CL 600 mm apo ronar, at least the one described in the older doc in French (http://cjoint.com/?BFommqp9Ssm) is held by a M90x1 threaded flange of overall diameter 121 mm.

[Ginette]

I may have one but I have to go look. It may be for the non-CL version. Anyone know if they are the same size?

John

Thanks John but the old lens have a M90x1 and the CL version M110x1.



Pour Ginette de Montréal, qui est peut-être francophone, voici à télécharger la notice de l'apo ronar de 600 mm en français.
Plus : in English and German, the official specs for the Apo Ronar CL 600 mm.

Merci Emmanuel pour les spécifications.



If I read Rodenstock's Process Lens Manual correctly, the 600/9 Apo-Ronar CL takes an M110x1 flange. skgrimes doesn't stock them, can make to order.
Ginette, you might want to ask Bob Salomon (posts here often) whether HP stocks them.

Yes I need a M110x1 and if Mr Salomon don't see the topic, I will PM him about.

[John Jarosz]

The non-CL 600 mm apo ronar, at least the one described in the older doc in French (http://cjoint.com/?BFommqp9Ssm) is held by a M90x1 threaded flange of overall diameter 121 mm.

This is the one I have. Sorry, but it looks like it won't work for you.

John

[joselsgil]

Ginette,

Try posting your request in the classified section of this forum. You may get a better response there.

Good luck,

Jose

[Ginette]

Mr Salomon said that is more available. I will post in the classified section and if no spair found, have to ask SK Grimes.