PDA

View Full Version : Need dimension of a KMV 8x10 camera



Daniel Stone
14-Jun-2012, 21:45
hey all,

found a nice case for sale that should fit a KMV I'm intending to purchase, but just wanted to check the outside dimensions to see if the case will work.

Need total width(including focus/lock knobs(little brown ones that drive rear standard), height(including handle), and depth.

thanks very much

-Dan


also, what's the dimension of the Kodak factory 5x7 back? Most important would be DEPTH(thickness). I'd like to be able to squeeze a 4x5 or 5x7 back in there with the camera, if size permits.

Doug Howk
15-Jun-2012, 04:10
18 5/8 x 12 5/8 x 4 1/8

Mark Sawyer
15-Jun-2012, 12:48
Mine is 13 1/2 x 12 3/8 x 4 1/4.

The factory 5x7 back is 12 x 12 x 1 3/16.

Doug Howk
15-Jun-2012, 14:00
Typo on mine above. Should read: 13 5/8 x 12 5/8 x 4 1/8

Daniel Stone
15-Jun-2012, 22:26
thank you gentlemen!

on to ordering the case :)

cheers,

Dan

Daniel Stone
16-Jun-2012, 20:37
Hey Greg,

I got this one here from JB Harlin:

http://jbhphoto.com/store/index.php/2011/02/07/medium-strebor-case/

It's pretty much a perfect fit IMO, just enough room to put the camera + the 4x5 or 5x7 back in behind the camera body, and have some room to store a few small things in with the camera body(such as 1-2 lenses). Mine are mounted on Toyo/Canham 110x110 boards, so less room than 6x6 boards in the bag.

-Dan