View Full Version : Compur-Rapid flash sync M or X
I have an Angulon 90mm f6.8 in a compur-rapid shutter (number 7041674) but I can't find anything that tells me whether this is an M or X sync connector post. Does anyone know?
Thanks
BrianShaw
27-Apr-2012, 13:33
I would assume M.
BrianShaw
27-Apr-2012, 13:35
I could be wrong, though.
BrianShaw
27-Apr-2012, 13:37
You can always test by rigging up a strobe and looking through the lens when you fire it. If you see the flash it is X. If the flash goes off before the shutter opens than it is M
Alternatively, rig up a flash bulb and look through the lens.
You can always test by rigging up a strobe and looking through the lens when you fire it. If you see the flash it is X. If the flash goes off before the shutter opens than it is M
Alternatively, rig up a flash bulb and look through the lens.
It would appear to be X sync by the fact I still can't see properly!
BrianShaw
27-Apr-2012, 14:45
That wears off after a while. Ikm still blinKing from a shutter I tested a few months ago.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.