View Full Version : Pyrocat Question
Bill Kumpf
23-Apr-2012, 10:55
Not wanting to start the Pyro Wars again, will someone explain the advantages and disadvantages of Pyrocat HD verus Pyrocat MC?
I am moving from shuffling film in tray to tanks with hangers. Film used is 4x5 and 8x10 FP4+ and 8x10 X ray processed .in PMK.
Thanks
Jay DeFehr
23-Apr-2012, 13:13
Bill,
If you're not using rotary processing, you should consider Obsidian Aqua:
Distilled water 70ml
Potassium metabisulfite 2g
Catechol 25g
Distilled water to 100ml
Dilute 1:500 with 0.666% potassium carbonate solution
Lots of advantages over any of the Pyrocats:
http://www.largeformatphotography.info/forum/showthread.php?87166-Obsidian-Aqua-catechol-staining-developer&highlight=obsidian+aqua
cdholden
23-Apr-2012, 18:56
Bill,
I'm also using trays and FP4+. If you want to try some 510-pyro, you're not too far from me and I have about 200 ml left before I make another batch.
I'll be mixing up some of the OA that Jay mentioned, but not sure when. I have all of the chemicals. I just have a few other things to complete from my TO DO list first.
Chris
Jim Fitzgerald
23-Apr-2012, 18:59
Bill, depends on how you are going to print as far as the dilution and time. I use 2:2:100 for about 6-8 minutes with my Efke-25 and 1:1: 100 with the x-ray film. Generally the x-ray can be from 4-8 minutes. Hope this helps.
sanking
23-Apr-2012, 19:32
Not wanting to start the Pyro Wars again, will someone explain the advantages and disadvantages of Pyrocat HD verus Pyrocat MC?
I am moving from shuffling film in tray to tanks with hangers. Film used is 4x5 and 8x10 FP4+ and 8x10 X ray processed .in PMK.
Thanks
Bill,
Go to http://pyrocat-hd.com/, then the thread Pyrocat M Versus Pyrocat HD.
For your work there would not be any advantage, IMO, between the two.
Sandy
Bill Kumpf
24-Apr-2012, 10:09
Tray processing of FP4 in 4x5 as worked well for several years. Moving to 8x10 in X-Ray didn’t work well. I purchased the 1 gallon size deep tanks from Richard Wasserman primarily for the x-ray film to address the scratch issue. I am slowing moving to carbon printing.
Some of the literature claimed Pyrocat negative will work for both sliver and alternative methods. That will allow me to print both.
Jay - At this stage I still prefer to buy chemical in kit form although eventually I will switch to mix my own and this one looks interesting.
Chris – Is this the summer for the “Nashville” get together?
Jim – Thanks for the starting points.
Sandy -Thanks for the web page link. I still want to do your carbon printing class.
Jay DeFehr
24-Apr-2012, 10:33
Bill, I understand. However, Artcraft Chemicals will make up any kind of kit you want -- just send them the ingredients and amounts.
Here is a an example of OA with 35mm Pan F+, handheld --
http://farm8.staticflickr.com/7046/6847038518_d27a89d8fb_b.jpg (http://www.flickr.com/photos/jay_defehr/6847038518/) Untitled (http://www.flickr.com/photos/jay_defehr/6847038518/) by Jay DeFehr (http://www.flickr.com/people/jay_defehr/), on Flickr
And a crop from the same negative --
http://farm8.staticflickr.com/7210/6993354975_349235a6ca_b.jpg (http://www.flickr.com/photos/jay_defehr/6993354975/) Untitled (http://www.flickr.com/photos/jay_defehr/6993354975/) by Jay DeFehr (http://www.flickr.com/people/jay_defehr/), on Flickr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.