PDA

View Full Version : 8x10 Film Holder Question



Robert Kalman
12-Apr-2012, 15:24
I've been shooting 4x5 for over 20 years. Finally broke down and acquired an 8x10 Chamonix and I'm looking forward to begin shooting with it. I bought 4 8x10 film holders on eBay and they arrived today. On the inside of each holder I found small pieces of double-sided tape attached to the holder. Some have a single piece, others have multiple pieces. (See attachment). I assume the previous owner placed them there to keep the film perfectly flat. Here are my questions:

> Do most 8x10 shooters alter their holders this way, or is this just idiosyncratic of the previous owner?
> Without tape, is keeping film flat an issue?
> If I keep the tape in the holder, will the tape leave a residue of some kind on the backside of the film?
> If I remove the tape, I assume I'll have to scrape off all the residue that's left behind. True?

Thoughts?

Thanks!

vinny
12-Apr-2012, 15:46
All of those questions have been answered recently in a thread on the subject of adhesive holders. Search for that.

Zaitz
12-Apr-2012, 15:48
http://www.largeformatphotography.info/forum/showthread.php?88122-Adhesive-holders

David Lobato
12-Apr-2012, 17:19
The film guide rails and everything else looks normal. The sticky pieces would make it difficult to slide film in the guides. Perhaps he used hand cut film slightly undersized? Or used a film with a thin flimsy base? Loose sheets can fall inside the camera after the dark slide is removed. There is more tape nearest the dark slide end as if vertical set ups were more likely to have film fall out.

You should contact the seller and ask why, or if, he added the tape. And what film he used. Hot weather conditions where film is less stiff? Any background knowledge will help.

adam satushek
12-Apr-2012, 18:51
Yeah I agree, check out the like above for the Adhesive holders thread. I learned a bunch from it. Have fully converted one of my holders and am in the process of converting 3 more. It seems like a really good system.

TheDeardorffGuy
12-Apr-2012, 19:08
[QUOTE=David Lobato;874573]The film guide rails and everything else looks normal. The sticky pieces would make it difficult to slide film in the guides. Perhaps he used hand cut film slightly undersized? Or used a film with a thin flimsy base? Loose sheets can fall inside the camera after the dark slide is removed. There is more tape nearest the dark slide end as if vertical set ups were more likely to have film fall out.

As long as the film is moving it will slide right over the tape.. I shoot 12x20 and on a real hot day I've had the film pop right out of the holder as soon as I puled the darkslide. At studios is is law to add tape when tilting the camera down. why risk it? There are holders that grip the film when you pull the darkslide all the way. I have none so I can't give a brand. When you make the tape have contact, I use a sheet of foam core cut to the full format and rub on it. Avoids scratching. I also rub the tape with my finger to remove some of the tac.

Andrew O'Neill
12-Apr-2012, 21:20
I always put a thin piece of double-sided tape inside my 8x10 holders. I only put in one piece not several as shown in your photo. The tape helps keep the film flat especially when camera is tilted down.

Robert Kalman
13-Apr-2012, 03:17
Thanks for all of your responses. Very helpful!

David Lobato
13-Apr-2012, 10:12
I also have to says thanks because I learned some good things here. Now I know to be more careful with my 8x10 film holders, especially while the camera is pointed down. I'm doing a restoration project on a 12x20 Korona camera and am certain double sticky tape will be necessary to keep film of that size in the film holder. TheDeardorffGuy, you saved me a bunch of trouble. And I have a V8 I really love.

John Kasaian
13-Apr-2012, 21:41
I don't use tape. So far, I 've never had a reason to.